[Renopower]

HI all,
I have original psa interface and works pefect with 09.129.
When i use clone it dont work, i try install drivers etc,
new firmwere but nothing works.
use w7 32 bit and w10 64 bit same problem.
Any idea.s ??  Thanks.

[Renopower]

Nobody ???? knows

[nicu_cuc]

what SN have lexia3 clone?

[Renopower]

Hi, 921815 C thats serial
Thanks for reply

[justdiag]

that is the model type. all chinese clones have internal serial not see on interface test except on debug logs or in eeprom + all chinese clones are no complete. I do advice you to look at titoun's rework turotial and you will understand all.

[nicu_cuc]

sn is ok
ceck obd2 cable

[Renopower]

thanks i try

---

sn is ok
ceck obd2 cable

Man man man you have the solution . Cable was defect  MANY thanks .
so simple but so lot off times THANKS again

[Renopower]

NOOOO not work, need restart laptop again and again

[zmann]

When we usually say Lexia (VCI) serial number it refers to Reference Serial as found on PSA Interface Checker.

True VCI serial number can be simply checked by opening a Diagbox "report" in the Report section which is automatically created when we run diagnosis on a true-diagbox vehicle (not on old cars). On pdf header we found as in the image.