Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Repair VCDS
09-09-2015, 17:50 PM,
Post: #41
|
|||
|
|||
RE: Repair VCDS
Something succeeded,I tested navigation plus on the table within K-BUS.
P.S no needed reflash GAL ic? P.S.S Thanks for help. |
|||
10-09-2015, 05:17 AM,
Post: #42
|
|||
|
|||
RE: Repair VCDS
No GAL reflash need
But use vcds 11.11.5 for Long Coding The vcds 12.12.0 has LC issue No need to reflash the tool again. It will works with same dump as you already flashed your tool Good luck |
|||
10-09-2015, 14:10 PM,
Post: #43
|
|||
|
|||
RE: Repair VCDS
Thanks friend for answer.
|
|||
12-09-2015, 14:29 PM,
Post: #44
|
|||
|
|||
RE: Repair VCDS
Is one problem with this VCDS,connect to car LED not work,then disconnect,again connect,disconnect---->connect,green LED work and cable work good,and first need connect to car,after that can connect to usb.
|
|||
27-12-2016, 13:15 PM,
Post: #45
|
|||
|
|||
RE: Repair VCDS
Dear people,
my english is so bad I want you to say sorry I hope you understand my I have 3 VagCom cables are all defeckt 11.30,12.12 and 12.12.3. as I have tried to repair read on site but I can not get there by I number of questions. people that my answer I would like to thank all fixed question: 1. if no GAL / ATF chip is then you do not have desoldering parts nevertheless 2. when I thyristor 12 v to connect LED should light up? 3. with mprog can all ftdi (BL, rl, BM et cetera) programming process? 4. I still think there are things that you say? All information that can help me welcome Yours sincerely, |
|||
27-12-2016, 17:10 PM,
(This post was last modified: 27-12-2016, 17:13 PM by mattydr67.)
Post: #46
|
|||
|
|||
RE: Repair VCDS
GAL or not you have to have Atmega not other MCU
If there is a STC in half cases you need to desolder it before programming For Atmega you need an Avr programmer Mprog for any Ftdi Bl, Bm Rl or newer Rq 7805 is there the LED will lught up if you plugg the tool to the car 7805 is not there the LED will light up when you olugg the tool to the USB I didn't understood what you ask but I hope my answares will help you Good luck |
|||
06-02-2019, 21:35 PM,
Post: #47
|
|||
|
|||
RE: Repair VCDS
Hello
can someone help me to get this to work interface not found |
|||
06-02-2019, 22:08 PM,
Post: #48
|
|||
|
|||
RE: Repair VCDS
You must plug to obd 12V supply and test again.
|
|||
07-02-2019, 09:35 AM,
Post: #49
|
|||
|
|||
RE: Repair VCDS
(06-02-2019, 22:08 PM)jo27hn Wrote: You must plug to obd 12V supply and test again. it`s the same interface not found VAGCOM_HWType detect cable but not vcds |
|||
07-02-2019, 14:57 PM,
Post: #50
|
|||
|
|||
RE: Repair VCDS
If you check in your pics the IC2 is not Atmega162.
You cannot flash it Good luck |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
VCDS Loader (Modded) | jtanner | 5 | 351 |
06-05-2024, 18:24 PM Last Post: justdiag |
|
VCDS 23.11.0 + LOADER | benyclaudiu | 15 | 3,412 |
02-05-2024, 07:15 AM Last Post: koldplayer |
|
VCDS HEX V2 (china) | standaBMW | 0 | 271 |
19-04-2024, 11:32 AM Last Post: standaBMW |
|
NEW VCDS all EU language 23.03.1 | pitercie | 5 | 624 |
17-04-2024, 06:11 AM Last Post: Karlos777 |
|
Bentley flying spur led tail light repair | ahmadarifai | 1 | 87 |
15-03-2024, 07:44 AM Last Post: audi666 |
|
AUDI G85 REPAIR | rasmoka | 1 | 136 |
07-03-2024, 14:35 PM Last Post: rasmoka |
|
Request: full VCDS scan Audi S3 2007/2008 | ries | 0 | 131 |
29-02-2024, 20:05 PM Last Post: ries |
|
MY VCDS COLLECTION - ALL YOU NEED I HOPE | fantomel | 77 | 63,246 |
25-02-2024, 11:34 AM Last Post: XuLeTZ |
|
76 PLA / 3C Lane Change - Errors on VCDS scanning only | spooky75 | 8 | 555 |
08-01-2024, 11:12 AM Last Post: spooky75 |
|
Solved ✔ Can I update this VCDS HEX-CAN clone? | jfim88 | 5 | 1,027 |
21-12-2023, 13:56 PM Last Post: jfim88 |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content