[ga3]

IMHO your SWFL & CAFD are NOT compatible with this FA. They seem to NOT even be compatible with your HWEL.

Are DSC2 and 5AT (2013/7~) incompatible?
This is the same configuration as the F10 LCI model.


It would be very helpful if you could tell me which option code is not compatible.

Not an option. Date. These SWFL and CAFD are for 2016+ cars. And FOR A DIFFERENT HWEL. You have Frankenstein DSC in your Frankenstein car.

I have no idea what you call DSC2. BMW nomenclature for your HWEL is DSC Premium 9 with 3 pressure sensors. The SFWLCAFDs in your DSC are for DSC Premium 9 with 1 pressure sensor.

Oops, my DSC was just flashed with the relatively new PSDZData.
Isn't it unreasonable to point out that?

[Node]

IMHO your SWFL & CAFD are NOT compatible with this FA. They seem to NOT even be compatible with your HWEL.

Are DSC2 and 5AT (2013/7~) incompatible?
This is the same configuration as the F10 LCI model.


It would be very helpful if you could tell me which option code is not compatible.

Not an option. Date. These SWFL and CAFD are for 2016+ cars. And FOR A DIFFERENT HWEL. You have Frankenstein DSC in your Frankenstein car.

I have no idea what you call DSC2. BMW nomenclature for your HWEL is DSC Premium 9 with 3 pressure sensors. The SFWLCAFDs in your DSC are for DSC Premium 9 with 1 pressure sensor.

Oops, my DSC was just flashed with the relatively new PSDZData.
Isn't it unreasonable to point out that?

I'll REPEAT myself AGAIN for a 3RD time: It was flashed WITH A WRONG SOFTWARE. Don't care if its new wrong or old wrong. It is still WRONG.

[ga3]

IMHO your SWFL & CAFD are NOT compatible with this FA. They seem to NOT even be compatible with your HWEL.

Are DSC2 and 5AT (2013/7~) incompatible?
This is the same configuration as the F10 LCI model.


It would be very helpful if you could tell me which option code is not compatible.

Not an option. Date. These SWFL and CAFD are for 2016+ cars. And FOR A DIFFERENT HWEL. You have Frankenstein DSC in your Frankenstein car.

I have no idea what you call DSC2. BMW nomenclature for your HWEL is DSC Premium 9 with 3 pressure sensors. The SFWLCAFDs in your DSC are for DSC Premium 9 with 1 pressure sensor.

Oops, my DSC was just flashed with the relatively new PSDZData.
Isn't it unreasonable to point out that?

I'll REPEAT myself AGAIN for a 3RD time: It was flashed WITH A WRONG SOFTWARE. Don't care if its new wrong or old wrong. It is still WRONG.

Thank you!

My DSC2 is "DSC/DXC9 L6 ACC Germany premium"
Is it wrong?
My friend's F10 LCI 2014/11 was also the same DSC and the same software.

It is also Frankenstein

[Node]

As I said you can try VO code with 16-07 date code (or even a bit newer). I have not looked into options. Also have no idea if this datecode is compatible with other things in your car.

[ga3]

As I said you can try VO code with 16-07 date code (or even a bit newer). I have not looked into options. Also have no idea if this datecode is compatible with other things in your car.

i will try it later today.
Thanks for your advice.

[dncomputech]

As I said you can try VO code with 16-07 date code (or even a bit newer). I have not looked into options. Also have no idea if this datecode is compatible with other things in your car.

i will try it later today.
Thanks for your advice.

Dates in FA greater than 07-2013 are F10LCI.  If greater than 11-2014 you will have 5AR operating up to 60km/h instead of the previous 40km/h

if before retrofit.  Your car does not have 2VH, you should remove 2VH from FA and VO Code DSC again.

[ga3]

As I said you can try VO code with 16-07 date code (or even a bit newer). I have not looked into options. Also have no idea if this datecode is compatible with other things in your car.

i will try it later today.
Thanks for your advice.

Dates in FA greater than 07-2013 are F10LCI.  If greater than 11-2014 you will have 5AR operating up to 60km/h instead of the previous 40km/h

if before retrofit.  Your car does not have 2VH, you should remove 2VH from FA and VO Code DSC again.

Thank you.
My car has 2VH(ICM V6.4).
Interesting about 5AR. It seems worth trying.

[ga3]

VO-CODE is now possible by changing the Type code from FP32 to XL12.
It seems that it was necessary to use the DSC2 generation Type. 
(In my memory at that time, I may have thought that I could VO-CODE with FP32)

Thanks to everyone who gave me advice.

Admins, please close this thread.