Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ BDC F16 can't flash with e-sys
20-10-2022, 17:52 PM,
Post: #1
XZBMW  BDC F16 can't flash with e-sys
Hi everyone, a friend brought me a 2015 F16 to make another key.
I remove BDC from car, put it on bench to make a new key with VVDI2 and VVDI prog.
I grind the eeprom pins to read it later with vvdi prog clip, but before that i always read and save FA and coding with e-sys.
Now the nightmare begins, no CAFD and no SWFL, i put back to car, CAS or BDC body is in red in ISTA.
Put back on bench and try to update with e-sys, BDC GW update ok but BDC body is impossible to update...
If someone can help me it would be nice

log BDC F16.txt
File Type: .txt
Downloaded: 12 times
Size: 7.83 KB

   

If this post helped you don't forget to press rep yes and thanks buttons under
20-10-2022, 20:14 PM,
Post: #2
RE: BDC F16 can't flash with e-sys
I think that eprom dump is corrupted, post dump or send it in PM

BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416  ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series

20-10-2022, 20:56 PM,
Post: #3
XZBMW  RE: BDC F16 can't flash with e-sys
0F94559 95256 BDC.zip
File Type: .zip
Downloaded: 6 times
Size: 4.44 KB


If this post helped you don't forget to press rep yes and thanks buttons under
21-10-2022, 19:19 PM,
Post: #4
RE: BDC F16 can't flash with e-sys
Flashing BDC with Esys on the bank is not possible after all? Since there is no terminal 15 released.
I'm also struggling with BDC F48 no way to flash and on the car terminal 15 locks.
22-10-2022, 00:10 AM,
Post: #5
RE: BDC F16 can't flash with e-sys
(21-10-2022, 19:19 PM)alexturbo Wrote:  Flashing BDC with Esys on the bank is not possible after all? Since there is no terminal 15 released.
I'm also struggling with BDC F48 no way to flash and on the car terminal 15 locks.

Thats because of ELV probably

  • FSC Repair kits - FSC Retrofits and Conversions Service history
  • Secure Coding 2.0 Type Key, FA, SFA, LCS Switch, SecOc, SME/HV Replacement
  • NBT/EVO/EntryNav2/MGU
  • MGU Carplay/Android auto W/O Telematics/CP/Patching in Middle East and Northern Africa
  • Feature Installer codes B2B
  • DME VIN ISN Working Hours IMMO OFF File and Remote Service/SWIFTEC - MG1 MD1 IMMO OFF
  • (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 ISN Reset
  • KAFAS4 Virgin and Patching Remote
  • CAS2/3/4 Full IMMO & LOCKSMITH Customization Dump & Remote
  • HUF5663_434Mhz NO REMOTE SIGNAL FIX
  • F&G Series Headlight Customization
Visit this user's website
23-10-2022, 18:15 PM, (This post was last modified: 23-10-2022, 18:20 PM by bm92.)
Post: #6
XZBMW  RE: BDC F16 can't flash with e-sys
(21-10-2022, 19:19 PM)alexturbo Wrote:  Flashing BDC with Esys on the bank is not possible after all? Since there is no terminal 15 released.
I'm also struggling with BDC F48 no way to flash and on the car terminal 15 locks.

i have only flashed BDC GW successfully

(20-10-2022, 20:14 PM)BMWzone Wrote:  I think that eprom dump is corrupted, post dump or send it in PM

how it could be corrupted ?
i did nothing except remove bdc from car, grind the pin of 95256, and read on bench with e-sys to save FA and coding before doing any steps on VVDI...

(23-10-2022, 18:15 PM)bm92 Wrote:  
(21-10-2022, 19:19 PM)alexturbo Wrote:  Flashing BDC with Esys on the bank is not possible after all? Since there is no terminal 15 released.
I'm also struggling with BDC F48 no way to flash and on the car terminal 15 locks.

i have only flashed BDC GW successfully


(20-10-2022, 20:14 PM)BMWzone Wrote:  I think that eprom dump is corrupted, post dump or send it in PM

how it could be corrupted ?
i did nothing except remove bdc from car, grind the pin of 95256, and read on bench with e-sys to save FA and coding before doing any steps on VVDI...

but i think i grinded the little component next to the eeprom, near the first pin...

If this post helped you don't forget to press rep yes and thanks buttons under
23-10-2022, 19:00 PM,
Post: #7
RE: BDC F16 can't flash with e-sys
I haven't Dump of 315 Mhz, anyway seems ok, a few bytes are enough to have problems, some happen to break the eprom while reading even if the dump is ok, try to replace the eprom

BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416  ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series

23-10-2022, 20:58 PM,
Post: #8
RE: BDC F16 can't flash with e-sys
(21-10-2022, 19:19 PM) alexturbo Wrote:  Flashing BDC with Esys on the bank is not possible after all? Since there is no terminal 15 released.
I'm also struggling with BDC F48 no way to flash and on the car terminal 15 locks.
I have successfully flashed BDC on the bench, just select the mounting mode for terminal control (with INPA). Then the ELV is not checked and KL 15 is active.
09-12-2023, 11:29 AM,
Post: #9
RE: BDC F16 can't flash with e-sys
(20-10-2022, 17:52 PM)bm92 Wrote:  Hi everyone, a friend brought me a 2015 F16 to make another key.
I remove BDC from car, put it on bench to make a new key with VVDI2 and VVDI prog.
I grind the eeprom pins to read it later with vvdi prog clip, but before that i always read and save FA and coding with e-sys.
Now the nightmare begins, no CAFD and no SWFL, i put back to car, CAS or BDC body is in red in ISTA.
Put back on bench and try to update with e-sys, BDC GW update ok but BDC body is impossible to update...
If someone can help me it would be nice

Friend, did you manage to solve the problem? The same situation
09-12-2023, 16:01 PM,
Post: #10
RE: BDC F16 can't flash with e-sys
Hi, yes it was my fault, when i was grinding eeprom to read it i killed a little resistor.
I took it from another BDC, resolder it and all was ok !!

If this post helped you don't forget to press rep yes and thanks buttons under
[+] 1 user says Thank You to bm92 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA FSCmap 184 54,057 24-04-2024, 14:49 PM
Last Post: Bag3ban1
  Flash CAS 3 for disable ELV UnFan 3 261 19-04-2024, 08:20 AM
Last Post: ravager
XZBMW Flash MPPK software 20D B47 (Esys) ruben_17non 5 624 10-04-2024, 21:38 PM
Last Post: ruben_17non
XZBMW BMW G8x M3/M4 CSL EGS flash weby 22 3,785 31-03-2024, 19:48 PM
Last Post: Erezbmwm
XZBMW m2 g87 csl flash Erezbmwm 0 158 31-03-2024, 18:46 PM
Last Post: Erezbmwm
  CCC flash WINKFP ICOM BimmerSLO 9 412 29-03-2024, 19:17 PM
Last Post: Hoborg
XZBMW E84 X1 25d with 8hp45x how to flash Alp*na or other EGS hasn38 0 129 23-03-2024, 00:26 AM
Last Post: hasn38
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,603 22-03-2024, 11:47 AM
Last Post: urgi
XZBMW DKOMBI2 G12 FLASH DUMP sebastianfernandes 2 281 03-03-2024, 06:46 AM
Last Post: sebastianfernandes
  E114A3 Error SeatBelt Acsm Issue after flash Billyjoe69 2 330 20-02-2024, 17:09 PM
Last Post: cedchung

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content