[welsh]

Hi.

So here the story goes.. customer 1st come to me with battery drain.
Find fuel pump constant running with key out. fuel gauge intermittently working.. & wipers starting and stopping.
So, it was bad BSI.. We find second hand matching one, & clone EEP (Didnt save new unit eeprom  )
Customer wanted spare key while at it.. so added key by bin file on bench while clone BSI EEP.

Install back on car, everything work well.. Fuel pump good, Fuel gauge good, Wipers work normal  
Oh, and both key start the engine okay 

Final thing need, to sync remotes for central locking try with im608 and xhorse.
but no matter what i do.. remote programming fail and says PIN code entered is incorret!
It has deleted all remotes now to. so none keys operate the central locking!

Anyone experience this? Pin code from all attempts and findings come back as pin is 67425 
but when try add remote, always say incorrect pin entered! 

Is it bad dump? (Ive attached 95160 read)
As said, it all works perfect. Just cant add remote for central locking. 
Original key was operating locks.. now none. and i cant re-add..

Please hope someone can advise.

Thanks

DEALER KEY ADD POSITION 2) CITROEN RELAY MM BSI READ 95160 EEP.rar
File Type:
Downloaded:	6 times
Size:	560 bytes

[raffy haddad]

Put programmed.key in ign turn on and push any button on remote for 10 sec
then off , open close door
test remote

[welsh]

Hi.

Tried this, & just try again but no result.
Thank you though

[welsh]

Anyone any other advise or a matching working bin file for test?

[wasya666]

hello, try pls PIN code 87255

[welsh]

wasya666 thanks. ill test in next few days

[elektronik13]

wasya666 thanks. ill test in next few days

pin is 67425 that's how it is there

[welsh]

Put programmed.key in ign turn on and push any button on remote for 10 sec
then off , open close door
test remote

wasya666 thanks. ill test in next few days

pin is 67425 that's how it is there

Thats pin i tried.
Any suggestions please?
going back to van today