Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
New tool fox flash programmer - opinion and suggestion
18-12-2022, 01:43 AM,
Post: #21
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
|
|||
19-12-2022, 00:12 AM,
Post: #22
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
More Chinese junk
|
|||
19-12-2022, 02:52 AM,
(This post was last modified: 19-12-2022, 02:54 AM by zapdus.)
Post: #23
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
I use KT200 and its nice for the price
Foxflash is very similar But I dont use as primary tool, have other original tools I have remapped a car long time ago Nissan denso diesel, I do mostly bosch, siemens, delphi diesel On this denso I had to open ECU and use KTAG, no other way With KT200 I did on bench without opening !! I also tried some ECU on bench it worked nice And also I have seen some people working nice on this tool, but also it can kill many ecus Before making a mess better to have full backup of ecu or search for feedback on the ecu you will work on with the tool you are using If you used the tool before on the same ECU should be fine I really dont expect a clone to work 100% Chip Diesel
Peugeot 206 2.0 HDI 90HP @3XX HP LOADING GTB2060VKLR billet Autotuner/MPPS/ECUDecoder/ECMTitanium ORI |
|||
25-12-2022, 00:21 AM,
Post: #24
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
Last time I done with success Delphi DCM6.2A adblue off PSA all by OBD, read very fast about 1-2 minuts, write ok and also 2 minuts, CKS without problem.
For me all of Ecus which I connected work. |
|||
06-01-2023, 09:06 AM,
(This post was last modified: 06-01-2023, 11:14 AM by bodzio012.)
Post: #25
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
Ford Transit sid208 by OBD read and DPF off write
edc17c60 from PSA read write bench all ok |
|||
14-01-2023, 10:22 AM,
(This post was last modified: 14-01-2023, 10:24 AM by bodzio012.)
Post: #26
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
Bosch Me9 from ford mondeo 2.5 T read perfect eep and flash by bench mode but write only eep, flash does not write- error contact with support
|
|||
06-02-2023, 19:42 PM,
Post: #27
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
bosch edc17c50 bmw bench read and write flaps off, with external chk calculation all good
bosch MD1Cs003 bench read 2minutes, write under 1 minute internal chk calculation, all good.yet to test on vehicle but will update. dpf off file supplied by member in here |
|||
09-02-2023, 07:26 AM,
Post: #28
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
Hi I did Mercedes sprinter ecu Delphi crd3 bench no problem other tools won’t read. Like pcm tuner or fc200. They need in boot mode. I have kt200
|
|||
24-02-2023, 16:48 PM,
Post: #29
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
(18-12-2022, 00:11 AM)Inovator Wrote: Anyone tried PCR2.1 with Foxflash? Hi Bros iI repeat the inquiry about pcr2.1, is it possible unlock, read and write via OBD, pls? Thx DISTRIBUTOR ORIGINAL PRODUCTS of OBDSTAR_PL&CZ
|
|||
24-02-2023, 21:55 PM,
Post: #30
|
|||
|
|||
RE: New tool fox flash programmer - opinion and suggestion
Yes it is if there is VR on server. But I would do it on bench.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content