Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mercedes ml400 w163 no power
|
25-01-2023, 13:59 PM,
(This post was last modified: 25-01-2023, 21:35 PM by aurica20.)
Post: #1
|
|||
|
|||
Mercedes ml400 w163 no power
hello dear friends,
I need some suggestions, a mercedes ml400 v8 diesel 2003 that refuses to start, in fact it does not receive current in the dashboard, when I put the key in ignition position 1, only the number of km and airbag&srs in the start position, the headlights come on, no it can also be connected to diagnostics... all the fuses are ok, I didn't find anything defective.... do you have any ideas? suggestions? thanks in advance.. and sory for my english. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
26-01-2023, 14:31 PM,
Post: #2
|
|||
|
|||
|
RE: Mercedes ml400 w163 no power
check driver side carped canbus terminal many time enter water
|
|||
|
|
|
26-01-2023, 18:28 PM,
Post: #3
|
|||
|
|||
RE: Mercedes ml400 w163 no power
(26-01-2023, 14:31 PM)vkarahan Wrote: check driver side carped canbus terminal many time enter water hank you that was the first place where i have checked, is very very clean like new... |
|||
|
|
|
27-01-2023, 08:06 AM,
Post: #4
|
|||
|
|||
RE: Mercedes ml400 w163 no power
(26-01-2023, 18:28 PM)aurica20 Wrote:(26-01-2023, 14:31 PM)vkarahan Wrote: check driver side carped canbus terminal many time enter water check this |
|||
|
|
|
27-01-2023, 08:50 AM,
Post: #5
|
|||
|
|||
|
RE: Mercedes ml400 w163 no power
Thanks i will do and come back with answers.
|
|||
|
|
|
27-01-2023, 12:47 PM,
Post: #6
|
|||
|
|||
RE: Mercedes ml400 w163 no power
(27-01-2023, 08:06 AM)vkarahan Wrote:(26-01-2023, 18:28 PM)aurica20 Wrote:(26-01-2023, 14:31 PM)vkarahan Wrote: check driver side carped canbus terminal many time enter water nothing wrong there 
|
|||
|
|
|
28-01-2023, 21:48 PM,
(This post was last modified: 28-01-2023, 22:45 PM by Clusters.)
Post: #7
|
|||
|
|||
|
RE: Mercedes ml400 w163 no power
well. almost done...the problem was confort module....i have find a circuit burned
i have repaired but still persist a strength problem, with that module after repair... burned second time... and this time a dioe is broken...with another module the power is ok all works but no start...any one know that electronic piece? from where to buy and maybe the reason of that problem??? with other module is work the power but with original... will be burn,,,see picture.. |