Possibly Related Threads…

***berniw*** · 27-05-2015, 19:27 PM,

I have ISTA/P 3.55.4.000 using Loader v 3.2 for ICOM Emulator.

I have set it all up correctly, used the Network Tool. When I try to connect it shows up ZGW and I input this, When ISTA/P opens up and I click create new session it comes up with server error. I have tried to connect to server automatically and manually. But will not connect.

Error is : -

" NO ISTA/P Server on which a session can be started was found. Try again later. "

Anyone had this before ?. tears

***lynxbmw*** · 27-05-2015, 21:18 PM,

(27-05-2015, 19:27 PM)berniw Wrote: I have ISTA/P 3.55.4.000 using Loader v 3.2 for ICOM Emulator.

I have set it all up correctly, used the Network Tool. When I try to connect it shows up ZGW and I input this, When ISTA/P opens up and I click create new session it comes up with server error. I have tried to connect to server automatically and manually. But will not connect.

Error is : -

" NO ISTA/P Server on which a session can be started was found. Try again later. "

Anyone had this before ?.

Restart pc.

***berniw*** · 27-05-2015, 21:27 PM,

I have ran the Network Tool again and restated, see if that works.

But if it didn't connect when on ENET in car, what difference does a restart make ?.

Sent from my iPhone

***lynxbmw*** · 28-05-2015, 05:35 AM,

When the local server is busy or cannot be found, you can't create new session.

***Dren1977*** · 28-05-2015, 06:07 AM,

(27-05-2015, 21:27 PM)berniw Wrote: I have ran the Network Tool again and restated, see if that works.

But if it didn't connect when on ENET in car, what difference does a restart make ?.

Sent from my iPhone

Network tool not needed for ENET.

Search forum. Kestum posted links with the instructions

***berniw*** · 28-05-2015, 06:41 AM,

Local server busy ?. Server is car on ENET. How can it be busy ?.

Sent from my iPhone

***kestum*** · 28-05-2015, 06:53 AM,

Instructions for ENET (beemerboy88)

***berniw*** · 28-05-2015, 07:05 AM,

Thanks Kestum, however this is how it is set up.

The problem I have got is connecting to car, it gives server error as above.

I can enter ZGW for emulator just will not create new session due to server error (car). I have entered the car address manually and still no connection.

I have updated ISTA/P from version 3.55.000 to 3.55.4.001 from a clean install without loading up loader. Every stage of update was successful, I have then started Loader after everything complete. Connection to ZGW gives address 169.254.4.86 and then when ISTA starts, I go to create new session but then get server error.

So connection to car with Loader is successful, connection with ISTA is not.

Thanks.

***inspi1981*** · 28-05-2015, 07:41 AM,

Server is Your computer

***berniw*** · 28-05-2015, 08:26 AM,

So when you do a ZGW Search on a car and it gives the IP Address, is that not taken from the Central Gateway Module (ZGW) then ?.

Sent from my iPhone

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ISTA+ Licenserequest 4.45.30	B O S S	0	59	57 minutes ago Last Post: B O S S
	ISTA+ 4.47.1x Install Files - MEGA	shawnsheridan	12	1,303	4 hours ago Last Post: shawnsheridan
	ista 4.46 Standalone	kiranabc	84	10,510	6 hours ago Last Post: kiranabc
	Esys error message only on EPS. ''Failed to get CAFs for SWE''	arthur101	2	97	Yesterday, 22:48 PM Last Post: arthur101
	BMW E83 A1 error - MRS: No message from DSC ...	ivanp	26	1,268	Yesterday, 13:20 PM Last Post: ivanp
	ISTA 4.46.xx problems and possible solution	Sedoy	97	11,604	Yesterday, 11:38 AM Last Post: vld
	ISTA 4.47.1x I-LEVEL+OVERVIEW	AutoExe3219	0	236	24-04-2024, 22:52 PM Last Post: AutoExe3219
	NBT Evo CAFD missing after coding error	Mugga	13	599	24-04-2024, 22:47 PM Last Post: Mugga
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,707	662,760	24-04-2024, 14:22 PM Last Post: Sedoy
	[MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed	hashtagmaster	61	18,375	21-04-2024, 22:17 PM Last Post: grizzle

Contact Us