[berniw]

I have ISTA/P 3.55.4.000 using Loader v 3.2 for ICOM Emulator.

I have set it all up correctly, used the Network Tool. When I try to connect it shows up ZGW and I input this, When ISTA/P opens up and I click create new session it comes up with server error. I have tried to connect to server automatically and manually. But will not connect.


Error is : -

" NO ISTA/P Server on which a session can be started was found. Try again later. "


Anyone had this before ?.

[lynxbmw]

I have ISTA/P 3.55.4.000 using Loader v 3.2 for ICOM Emulator.

I have set it all up correctly, used the Network Tool. When I try to connect it shows up ZGW and I input this, When ISTA/P opens up and I click create new session it comes up with server error. I have tried to connect to server automatically and manually. But will not connect.


Error is : -

" NO ISTA/P Server on which a session can be started was found. Try again later. "


Anyone had this before ?.

Restart pc.

[berniw]

I have ran the Network Tool again and restated, see if that works.

But if it didn't connect when on ENET in car, what difference does a restart make ?.


Sent from my iPhone

[lynxbmw]

When the local server is busy or cannot be found, you can't create new session.

[Dren1977]

I have ran the Network Tool again and restated, see if that works.

But if it didn't connect when on ENET in car, what difference does a restart make ?.


Sent from my iPhone

Network tool not needed for ENET.

Search forum. Kestum posted links with the instructions

[berniw]

Local server busy ?. Server is car on ENET. How can it be busy ?.


Sent from my iPhone

[kestum]

Instructions for ENET (beemerboy88)

[berniw]

Thanks Kestum, however this is how it is set up.


The problem I have got is connecting to car, it gives server error as above.

I can enter ZGW for emulator just will not create new session due to server error (car). I have entered the car address manually and still no connection.

I have updated ISTA/P from version 3.55.000 to 3.55.4.001 from a clean install without loading up loader. Every stage of update was successful, I have then started Loader after everything complete. Connection to ZGW gives address 169.254.4.86 and then when ISTA starts, I go to create new session but then get server error.

So connection to car with Loader is successful, connection with ISTA is not.


Thanks.

[inspi1981]

Server is Your computer

[berniw]

So when you do a ZGW Search on a car and it gives the IP Address, is that not taken from the Central Gateway Module (ZGW) then ?.


Sent from my iPhone