Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW G21 rear camera retrofit
01-02-2023, 22:47 PM,
Post: #11
|
|||
|
|||
RE: BMW G21 rear camera retrofit
|
|||
01-02-2023, 22:52 PM,
Post: #12
|
|||
|
|||
RE: BMW G21 rear camera retrofit
(01-02-2023, 22:47 PM)Pedrom92 Wrote:(01-02-2023, 18:54 PM)Node Wrote: Should be. Why not? You could easily add 3AG and code it even though EU spec doesn’t come with it (USA does) Coding 2.0 File Service - Region Change/Typekey - SFA iDrive 8.5 REGION CHANGE
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
01-02-2023, 23:09 PM,
Post: #13
|
|||
|
|||
RE: BMW G21 rear camera retrofit
Thanks.
So I'm going to buy the parts, I have installation wires for an f48 I think I can adapt to this one. the diagram has the same number of wires. |
|||
16-02-2023, 16:20 PM,
Post: #14
|
|||
|
|||
RE: BMW G21 rear camera retrofit
(01-02-2023, 23:09 PM)Pedrom92 Wrote: Thanks. camera on f48 uses can3 line, more suitable and less expensive is G3x post-assembly wiring, it costs around 30 euros and is already suitable for ethernet signals |
|||
18-02-2023, 09:54 AM,
Post: #15
|
|||
|
|||
RE: BMW G21 rear camera retrofit
I recently did this on BMW F40 with help.
Camera connected via ethernet to BDC. I added 3AG to FA but was unable to flash camera and make it work. Turned out I needed 5DM option and it was possible to flash and worked perfectly after. So I added 5DM with only the reverse camera and it works without problem. |
|||
24-02-2023, 15:16 PM,
Post: #16
|
|||
|
|||
RE: BMW G21 rear camera retrofit
I can confirm You must Put 5DM option to Vehicle order , my car came originally with 5DM , I switch the hole system to 5DN 3D surround view .
ICAM2-R you need because ecu is inside the rear camera. see if the build is newer than your car , then it wil work with no problem. I sold my original Icam2-R last week. they are on eBayalso . if you go to Newtis you find the wiring diagram needs to be wiring with 7 wires from bdc to rear of the car hopefully you find the correct wire ,there are 2 black shielded cable going to BDC . the icam2-R plug is different than the Icam2-S they are not switchable , the wiring pins are different to. kind regards. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Tool to use to cut leather dashboard for hud retrofit | Fx82 | 3 | 236 |
5 hours ago Last Post: Fx82 |
|
F01 LCi Xenon Headlight Retrofit | mcrussell | 0 | 46 |
16-05-2024, 11:57 AM Last Post: mcrussell |
|
retrofit USB BMW E63 | Jalami | 9 | 245 |
15-05-2024, 17:39 PM Last Post: The CaT |
|
Retrofit comfort access BMW f26 | santopalermo | 13 | 400 |
14-05-2024, 12:25 PM Last Post: ruben_17non |
|
Help for front and rear camera with iCam in e9x | ruben_17non | 0 | 67 |
13-05-2024, 13:54 PM Last Post: ruben_17non |
|
F25 cic retrofit | hero3838 | 3 | 107 |
10-05-2024, 15:44 PM Last Post: Siki78 |
|
G21 paddles retrofit | bm92 | 5 | 222 |
09-05-2024, 21:07 PM Last Post: bm92 |
|
Is it possible to retrofit G30 seat to G20? | hitit | 0 | 102 |
08-05-2024, 14:22 PM Last Post: hitit |
|
Is it possible to switch between rear-view and side-view in 5DL? | lacost | 0 | 71 |
07-05-2024, 16:58 PM Last Post: lacost |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 892 | 471,016 |
07-05-2024, 04:30 AM Last Post: SkeYT |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content