[leungsk1]

Hi guys,

I did the retrofit and everything appears to be working perfectly.  Just one question - is it possible to "force" KOMBI to use km/h instead of mph when setting speed limit or enabling cruise control?  I have to mention that my car is a RHD ECE specs (Hong Kong car using km/h) and I installed a 6WA from the US. Also the BC_Digital_V is showing km/h correctly but not speed limit and cruise control.  See attached.

[Simoniak]

Hi, did you VO code your cluster with Esys after instal in car?

[leungsk1]

Yes sir I did VO coded that's why I said BC_digit_v is showing km/h as you can see from my photos

[yayaasd]

you can code the km/h in the KOMBI and check also HU

try this:
KOMBI L7_MID > PIA_Einheiten 3008 > GESCHW_EINHEIT = km/h [Default]
KOMBI L7_MID > PIA_Einheiten 3008 > WEG = km [Default]
ICMQL > Daten 3000 > IcmKod_B_KmTacho = verbaut
HU_NBT > SYSTEM_EINSTELLUNGEN 3004 > DEFAULT_WEG_EINHEIT = km

[leungsk1]

Thank you very much yayaasd

I checked all the codes you mentioned and they were already coded as km, verbaut

I notice that KOMBI will force MPH even if I try to change it from the iDrive menu. See attached photos.

[leungsk1]

Anyone has an idea please?