Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

KT200 Rework
25-09-2023, 10:48 AM,
Post: #31
RE: KT200 Rework
Can bus works with bench box...problem is in car and bench without box
...tested all cables good
Seller wants me to send the unit back for a repair on my expence..
Nice support,the tool is bought 3 months ago along with htprog and neither one works
Quote this message in a reply
25-09-2023, 13:02 PM,
Post: #32
RE: KT200 Rework
but...if you upgrade hardware with new components the seller dont repair it
Quote this message in a reply
25-09-2023, 19:14 PM,
Post: #33
RE: KT200 Rework
(25-09-2023, 10:48 AM)dimitar Wrote:  Can bus works with bench box...problem is in car and bench without box
...tested all cables good
Seller wants me to send the unit back for a repair on my expence..
Nice support,the tool is bought 3 months ago along with htprog and neither one works

Where did you buy?
Quote this message in a reply
26-09-2023, 04:47 AM, (This post was last modified: 26-09-2023, 04:51 AM by dimitar.)
Post: #34
RE: KT200 Rework
(25-09-2023, 19:14 PM)Wilus Wrote:  
(25-09-2023, 10:48 AM)dimitar Wrote:  Can bus works with bench box...problem is in car and bench without box
...tested all cables good
Seller wants me to send the unit back for a repair on my expence..
Nice support,the tool is bought 3 months ago along with htprog and neither one works

Where did you buy?

Bought from ecuhelp

(25-09-2023, 13:02 PM)carmageddon1970 Wrote:  but...if you upgrade hardware with new components the seller dont repair it

Doesnt matter the point is that the seller wants me to send the unit for a test, after  he will tell me the price for a repair
Quote this message in a reply
26-09-2023, 05:28 AM,
Post: #35
RE: KT200 Rework
i hade one problem with one kt200 that i used only to read one mj9....after this successfully reading the tool is dead (grey selection with no possibilities to select driver)...i contacted the seller and he connected via teamviewer to my pc to make all tests...after this he want the tool back to repair...before ship i upgrade all hardware because maybe the problem was not firmware/software....nothing to do, same story, tool dead...then i ship at mine cost and after 4 days the tool has arrived to the seller that open it to repair and when see my upgrade HW say that cannot repair....i want to pay for repair but he dont want to repair.

good luck
Quote this message in a reply
30-09-2023, 22:17 PM,
Post: #36
RE: KT200 Rework
And you bought kt200 again??...
Quote this message in a reply
08-10-2023, 11:56 AM,
Post: #37
RE: KT200 Rework
i hawe me got befor on wek ,and not work grey selection with no possibilities to select driver
hawe pay 730USD
from ecuhelp.com
Vincent-Ting
Big schit
Quote this message in a reply
08-10-2023, 12:22 PM,
Post: #38
RE: KT200 Rework
I have a niiiice experience with this tool!
I sold it after rework! Bye bye kt200!
Welcome hexprog 2!
Quote this message in a reply
08-10-2023, 13:33 PM,
Post: #39
RE: KT200 Rework
Hi All !
My friend has fox flash and I see that it seems like kt200, He has problem with bench, not work bench, I tested his bench cable and his benchbox with my foxflash and all working very well. By obd working very well too.
What part is responsible for communication via the bench?
Quote this message in a reply
08-11-2023, 09:19 AM,
Post: #40
RE: KT200 Rework
(08-10-2023, 13:33 PM)bodzio012 Wrote:  Hi All !
My friend has fox flash and I see that it seems like kt200, He has problem with bench, not work bench, I tested his bench cable and his benchbox with my foxflash and all working very well. By obd working very well too.
What part is responsible for communication via the bench?

Did you fix it? I have the same problem. Thanks
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  KT200 v2 full with offline dongle FEEDBACK ROD-BENDERS 94 7,410 Yesterday, 14:19 PM
Last Post: drewdoom
  Who can rework ORIGINAL KESS V2 pluto2013 7 1,887 15-04-2024, 17:43 PM
Last Post: mdanilo
JFiat Magneti Marelli 9df 001 read KT200 OBD Portela 2 357 18-09-2023, 17:34 PM
Last Post: carmageddon1970
  Kess V2 Rework vectrac20tsri 4 1,786 23-04-2023, 14:15 PM
Last Post: elioc9
  PROBLEM NEW KT200 abbate 2 1,194 09-10-2022, 18:26 PM
Last Post: autobamm
  galetto rework ronaldo2002 4 1,183 09-10-2022, 13:24 PM
Last Post: domelec
  Ktag v7.020 rework help salliemohamed 1 834 04-05-2022, 07:02 AM
Last Post: Red_Mango
  Kess v2 rework issue vectrac20tsri 0 476 31-10-2019, 19:24 PM
Last Post: vectrac20tsri
  Kess V2 and Ktag Rework Burt_100 0 791 11-04-2019, 18:46 PM
Last Post: Burt_100
  Ktag rework ltujustas 4 3,422 06-06-2018, 08:44 AM
Last Post: PUMUKY

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content