[Garryq]

Hi,
I have an strange issue with G30 laser light retrofit. Done all wiring as Carsystems instructions. Flashed and coded FLE modules with LCI FA. BDC2 updated to latest ilevel.
Ista shows error with High Beam laser:
8059CF High beam, laser: Locking of the laser system active
805B4F High beam, laser: Locking of the laser system active

I have added manually the Data Matrix code for each headlight using ABL in Ista. Before this was also another error about classification of resistor that disappeared after inputting the numbers from both headlights. Input 10 digit and 3 digit number. It show successful but still fault persists. Adaptive headlight error and high beam left and right error on dash.
Headlight do work low and high beam but no adaptive function.
Any ideas? How to remove this erros?

[donjuan020]

Have you talked to carsystem about this? They will offer you a solution.

[qbek90]

Is service function for this error,but in BDC3

[rana]

Is service function for this error,but in BDC3

what ista copy you have

[Bagum4uk]

Hi,
I have an strange issue with G30 laser light retrofit. Done all wiring as Carsystems instructions. Flashed and coded FLE modules with LCI FA. BDC2 updated to latest ilevel.
Ista shows error with High Beam laser:
8059CF High beam, laser: Locking of the laser system active
805B4F High beam, laser: Locking of the laser system active

I have added manually the Data Matrix code for each headlight using ABL in Ista. Before this was also another error about classification of resistor that disappeared after inputting the numbers from both headlights. Input 10 digit and 3 digit number. It show successful but still fault persists. Adaptive headlight error and high beam left and right error on dash.
Headlight do work low and high beam but no adaptive function.
Any ideas? How to remove this erros?

That’s right - you need to use Tool32 to unlock them in FLM2 modules.
Otherwise impossibly to do it, because BDC2 don’t have this option in Ista

[Garryq]

Have you talked to carsystem about this?  They will offer you a solution.

Carsystems didnt want to help with that.

---

Hi,
I have an strange issue with G30 laser light retrofit. Done all wiring as Carsystems instructions. Flashed and coded FLE modules with LCI FA. BDC2 updated to latest ilevel.
Ista shows error with High Beam laser:
8059CF High beam, laser: Locking of the laser system active
805B4F High beam, laser: Locking of the laser system active

I have added manually the Data Matrix code for each headlight using ABL in Ista. Before this was also another error about classification of resistor that disappeared after inputting the numbers from both headlights. Input 10 digit and 3 digit number. It show successful but still fault persists. Adaptive headlight error and high beam left and right error on dash.
Headlight do work low and high beam but no adaptive function.
Any ideas? How to remove this erros?

That’s right - you need to use Tool32 to unlock them in FLM2 modules.
Otherwise impossibly to do it, because BDC2 don’t have this option in Ista

Yes. I fixed it with helping one forum member.