Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ MSD81.2 old zusb to eliminate brake vacuum sensor fault
13-04-2023, 10:42 AM,
Post: #1
|
|||
|
|||
MSD81.2 old zusb to eliminate brake vacuum sensor fault
I had saved an old zusb to eliminate error 002FD3 from MSD81.2 but can't trace the file. Anyone who can share? Will appreciate.
|
|||
13-04-2023, 18:32 PM,
Post: #2
|
|||
|
|||
RE: MSD81.2 old zusb to eliminate brake vacuum sensor fault
Just disable DTC for this error and failsafe mode will be gone.
|
|||
14-04-2023, 07:43 AM,
Post: #3
|
|||
|
|||
RE: MSD81.2 old zusb to eliminate brake vacuum sensor fault
(13-04-2023, 18:32 PM)SkeYT Wrote: Just disable DTC for this error and failsafe mode will be gone. Yes, this is also an option. I can read the dme flash but I dont have the knowledge to disable the DTC unless I send to a tuner or I get guidance what fields to alter. If all fails I might go that route. |
|||
14-04-2023, 13:23 PM,
Post: #4
|
|||
|
|||
RE: MSD81.2 old zusb to eliminate brake vacuum sensor fault
post the file here
|
|||
15-04-2023, 06:59 AM,
Post: #5
|
|||
|
|||
RE: MSD81.2 old zusb to eliminate brake vacuum sensor fault
|