Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
bmw X3 3.0L M57 automatic engine start
15-04-2023, 16:09 PM,
Post: #1
|
|||
|
|||
bmw X3 3.0L M57 automatic engine start
Hello, i have an X3 3.0L automatic engine from 2007 (WBAPD920X0WG02048), ecu is 0281014544, sw 7809787
I have mounted on an nissan patrol chassy, i have used the electrical installation, an emulator for immobilizer. Powerlines i have used the big (30+) for 1,3,5.. ground 2,4,6 and (7) for ignition, (8) for kline, (10) for immo. Main relay pin (44) big connector-brown wire, Fuel pump pin (32) Starter black wire from ews Can (33),(46) To supply engine i had to cut the 44 and 32 pins and put them to the ground since i have no signal to then on ignition! After cranck i have the follwing errors: - 4600 Rail Pressure Plausability Pressure Controlled DDE - 4B90 Rail Pressure Monitoring On engine Start - 48C3 EGS1 - 4AA3 EGS2 - 48A3 ASC1 I guess i have to do something with the brake switch and parking position to start! Does anyone has a schematic in english or the pinaout for this ecu? Thx! Later edit: i have found brake switch pin (23) to powersupply (15) ignition! |