[BENMADI]

Hello team,


i have a problem with my 545i bmw E60 i need to delete the limp mode the car stuck in 4500 RPM ,need to rise rpm for power loos mode to 6800 RPM

Attached a partial read with KESS V2

Regards

[sivyx]

What dtc you have?
And for quick request post in thread ecu model and sw number

[BENMADI]

i have a knock sensor dtc i replaced it now no dtc but engin still goes to limp mode need only to bypass this mode and get a normal rev limiter at 6800 RPM for the software number kess v2 Dont show it for this ECU Dont know mhy its bosh ME9.2.1 I think

[____ANGEL___]

here's some me9.x damos https://cartechnology.co.uk/showthread.p...#pid340609 maybe you can solve this yourself, anyway it's strange that the issue was solved but the limiter stays in place till now

[BENMADI]

here's some me9.x damos https://cartechnology.co.uk/showthread.p...#pid340609 maybe you can solve this yourself, anyway it's strange that the issue was solved but the limiter stays in place till now

Thanks mate but this damos is not compatible with my ecu

[wjgud123]

First, flash ecu with WinKfp to restore factory software.
After that check if car still is go in limp mode.

Maybe somebody remove dtc table?

And yes, it should be Bosch ME9.2

[____ANGEL___]

this is zb7561115, program7544610, data7561116, referenz0087250D610B0C5X3, ME_921, EK9282, E6X MJ04 N62 B44

here's some me9.x damos https://cartechnology.co.uk/showthread.p...#pid340609 maybe you can solve this yourself, anyway it's strange that the issue was solved but the limiter stays in place till now

Thanks mate but this damos is not compatible with my ecu

true but same ecu, so something will be in other positions but same things