[pforms]

Hi I had 2015 jetta all key lost smart key. I used im608 to make key by dump. Read and write eeprom via programmer ok. put cluster back in car for next step write eepom via OBD but it need to turn on cluster and at this point it can not with out the key.so i can not go futher. can you get me guidance. thank you all

[jokir]

First, you need to replace the ignition insert for which you have a spare key, and then you can proceed to customize the key.
Or contact an authorized service center and they will make a replacement key according to the VIN.

[pforms]

First, you need to replace the ignition insert for which you have a spare key, and then you can proceed to customize the key.
Or contact an authorized service center and they will make a replacement key according to the VIN.

Thank you for help but this car had smart key sensing area at the steering colunmn. There is no key insert. If buy key from dealer with VIN do I still need key learning which will need PIN + CS ? Thank you

[raffy haddad]

When you order key from dealer it come ready with car data just need learn , OR
Make dash on bench all the steps if you have pinout , read immmo data and save and make dealer key
then conect dash in car and try learn key
Mostly it will let you turn on ign when reach that step but must find the exact location for sensor antenna
If not tirn on try pin 1 and 16 bridge obd2 socket if can turn on dash

Regards