[viki300]

can i get some where info on those error codes from esys log so i can figured out what is wrong i attach log here

esys error log.txt
File Type:
Downloaded:	22 times
Size:	191.7 KB

[It3_Magic]

Was ignition on/ did you knock out the connection to car by accident?

[viki300]

ignition was on and no i didnt knock it it was steady

[Node]

Well, from the log the ONLY thing is clear - car stopped responding. But you REALLY need to provide MUCH more information what is your setup.

I guess you used ENET cable? Are you using router/DHCP or just APIPA address? Was external power supply connected? If yes was it up to it's task?

Without any more data it COULD have been ANYTHING!!! Crappy cable, crappy laptop, crappy/no power supply, car disturbed in some other way (opening/closing doors, pressing buttons)... I've even seen otherwise perfectly good laptops which just did not want to work properly and were randomly dropping connections.

[viki300]

Hi yes using enet and dhcp like allways and good power supply as well enet cable been working before maybe i try tomorrow with icom and this laptop been working so far ok how ever i know on this car has bad ibs that might be cause as well but i get new one tomorrow as well

[It3_Magic]

if you were able to calculate tal your connection was fine up to the point of calculating, it was no longer the case when you tired flashing.

[viki300]

solved did flash with icom and no problems so looks like my enet is bad