[Sn0w3y]

Hello Guys,

i want to change Cluster on a Golf V.

Old Cluster: 1K6920863
New Cluster: 1K6920864

EEPROM Files Attached..

I tried to Adapt everything but Car does not start..

FVDI 2018 is available aswell as VCDS. I also attached the File AFTER Key learned on Dash with FVDI. Key is learned. Only Engine is not allowed to start (VCDS tells me this info. Every other Block is "ready".

Greetings and thanks!

[evg_eni]

There is no public tool for Visteon cluster (even AVDI will not give you full data). But here is your immo data decoded with my own tool. Put this on your VDO and share results.

[spacewalker]

go to ecu, do ecu adaptation and synchronise with cluster

[Sn0w3y]

There is no public tool for Visteon cluster (even AVDI will not give you full data). But here is your immo data decoded with my own tool. Put this on your VDO and share results.

Thanks! Will try and report! You exported this from the Visteon Cluster right?

Greetings

[evg_eni]

Yes, this is complette info to start your car with any other cluster you want. even if new one is visteon also, clone is possible.

[Sn0w3y]

Hi, i tried to swap all Info to the VDO Cluster including PowerClass bit VCDS tells me that ECU is not Adapted to IMMO on new Cluster.. Channel 50 does not let me open because of false PIN (even if it tells me OK in Security Access)

Greetings..

[evg_eni]

Post screenshot of data you entered. Also 25immo/live data/group 002

[Sn0w3y]

Attached EEPROM IMMO Data of VDO AFTER I entered the Values.

           

[Platone]

Attached EEPROM IMMO Data of VDO AFTER I entered the Values.

Read immo data from ECU and put it in VDO Cluster
VIN
ID
MAC
CS (7 byte CS read from Visteon)
PIN