Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ Kombi programming failed E70
10-08-2023, 14:30 PM,
Post: #1
Kombi programming failed E70
Guyz, I need some help. I\ve replaced FRM module, but when programming in ISTA P, voltage dropped (a damn bad charger) and KOMBI went failed.
I cannot connect with winkfp, error 200.
Now, I can't revive kombi, car starts but no kombi. Is my cousin;s car.
ICOM Next, sp daten for e70 installed...
Now, can someone help me out with this remote? Anydesk or teamviewer.
I am willing to pay effort.
Thanks!


10-08-2023, 15:07 PM,
Post: #2
RE: Kombi programming failed E70
(10-08-2023, 14:30 PM)AdiP Wrote:  Guyz, I need some help. I\ve replaced FRM module, but when programming in ISTA P, voltage dropped (a damn bad charger) and KOMBI went failed.
I cannot connect with winkfp, error 200.
Now, I can't revive kombi, car starts but no kombi. Is my cousin;s car.
ICOM Next, sp daten for e70 installed...
Now, can someone help me out with this remote? Anydesk or teamviewer.
I am willing to pay effort.
Thanks!

I don't think it's possible unless you see it.
It will need to be reprogrammed with a programmer.
This will not happen remotely.


Reputation: +1 - al70 [+1]
10-08-2023, 15:09 PM,
Post: #3
RE: Kombi programming failed E70
(10-08-2023, 15:07 PM)vld Wrote:  
(10-08-2023, 14:30 PM)AdiP Wrote:  Guyz, I need some help. I\ve replaced FRM module, but when programming in ISTA P, voltage dropped (a damn bad charger) and KOMBI went failed.
I cannot connect with winkfp, error 200.
Now, I can't revive kombi, car starts but no kombi. Is my cousin;s car.
ICOM Next, sp daten for e70 installed...
Now, can someone help me out with this remote? Anydesk or teamviewer.
I am willing to pay effort.
Thanks!

I don't think it's possible unless you see it.
It will need to be reprogrammed with a programmer.
This will not happen remotely.

Agree..
You can maybe try with winkfp/NFS, but get ready for a 35080 chip programmer
Reputation: +1 - al70 [+1]
10-08-2023, 20:17 PM,
Post: #4
RE: Kombi programming failed E70
Do turn indicators blink in kombi? Does it answer in tool32 to ident job, with KOMB70.prg?
11-08-2023, 03:57 AM,
Post: #5
RE: Kombi programming failed E70
(10-08-2023, 14:30 PM)AdiP Wrote:  Guyz, I need some help. I\ve replaced FRM module, but when programming in ISTA P, voltage dropped (a damn bad charger) and KOMBI went failed.
I cannot connect with winkfp, error 200.
Now, I can't revive kombi, car starts but no kombi. Is my cousin;s car.
ICOM Next, sp daten for e70 installed...
Now, can someone help me out with this remote? Anydesk or teamviewer.
I am willing to pay effort.
Thanks!

Did you try battery reset and retry ISTA/P?
11-08-2023, 06:14 AM,
Post: #6
RE: Kombi programming failed E70
if the kombi not answered in car then only programmer job. cheapest solution i think is r270. roundabout 20€

then you can write new dump on chip and programm it after that in car
11-08-2023, 07:31 AM,
Post: #7
RE: Kombi programming failed E70
Drove 200km to a guy, I've left the car there, now I'm waiting, he told me that it can be a 5 min job or 2 hours (bench case). Kombi had turn lights blinking.
I'll let you know about status. Ty for infos!


11-08-2023, 08:17 AM,
Post: #8
RE: Kombi programming failed E70
if is no communication r270 will not help. Its eprom prog. In this case flash is damaged and it will end up with cluster replacement more likely
11-08-2023, 12:14 PM,
Post: #9
RE: Kombi programming failed E70
(11-08-2023, 07:31 AM)AdiP Wrote:  Kombi had turn lights blinking.

Thats mean that it's in the programming state, WinKfp should help.
Reputation: +1 - al70 [+1]
14-08-2023, 18:58 PM,
Post: #10
RE: Kombi programming failed E70
Eeprom rewrite was the solution. All good now!




Possibly Related Threads…
Thread Author Replies Views Last Post
  F25 5AS,8th and 5AC coding with 6wb kombi simplextibi 1 86 04-05-2024, 06:37 AM
Last Post: Stratofortress
XZBMW G12 used Kombi 35128WT palapas1974 14 575 29-04-2024, 17:54 PM
Last Post: johann74270
XZBMW E60 M5 KOMBI cruise control bmwfnatic 4 194 29-04-2024, 09:51 AM
Last Post: bmwfnatic
XZBMW Esys error message only on EPS. ''Failed to get CAFs for SWE'' arthur101 2 152 25-04-2024, 22:48 PM
Last Post: arthur101
ZSkoda Solved ✔ ISTA Standalone WLAN programming botho 4 401 21-03-2024, 11:13 AM
Last Post: botho
XZBMW F15 Programming Error mcrussell 7 473 20-03-2024, 05:38 AM
Last Post: SweetBMW
XZBMW BMW X6 E71 Programming Ryzen 5 287 16-03-2024, 12:42 PM
Last Post: Node
  BMW preLCI G11 - LCI KOMBI retrofit Volum 1 158 14-03-2024, 17:31 PM
Last Post: jaramillo
  Entrynav2 FI failed to install FSC pack Pedrom92 7 493 06-03-2024, 22:18 PM
Last Post: Billyjoe69
  Help virginize Kombi mid X3 F25 bmw320d 1 174 05-03-2024, 12:50 PM
Last Post: pawelkos

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content