[laquangksxd]

With reversing camera:
- F30 use icam from 07/2017.
- F31 does not support icam.
- The information required to install the Icam is incorrect. Please check wiring, fuse and ecu.
Ps: If your car has been retrofit nbt evo, you can retrofit icam (icam needs to be coded on benh and wiring is also different)

[henkdejong]

For vehicles with reversing camera and surround view. Control unit Front Electronic module FEM To 07-2017

[DEJMIEN]

For vehicles with reversing camera and surround view. Control unit Front Electronic module FEM To 07-2017

All FEM's modules with hw. lower than 9.0 does not support the ICAM camera!
If your hw is not 9.0 and it probably isn't, because they came out after 07/2017, the ICAM camera will not be visible in esys! then you only have two options to make it work.

[Freddy1]

I was successfull with pinning it A173*7B, not *8B, still on pin 51 and 52, somehow it doesn´t make sense to me, but this way I got it showing up in E-Sys.

Oh btw, earlier I pinned it to fuse 159, 154, 159 had same color, so it made more sense to me