[qbek90]

Hi,I changed FRR in G11,old was damaged after car crasch.I need programed FRR,but i have error in progress programing.

[PsevDo]

select correct shipment of the car, also use more recent pszdata

[DEJMIEN]

Target give you different btld and swfl, that’s mean you didn't get the same radar for G11 or or your VO/shipment is no good, yes I see that hw matches but that's only because you hit hw-id's button. Your shipment is the same as your target!

[Node]

Actual bootloader is from non-LCI car. Target bootloader is LCI. HWEL was same on both. I'm just not sure you can reflash non-LCI to NEWEST LCI which had newer hardware. Either that or new FRR has faulty flash memory.

---

P.S. Try to choose any of 20-11-xxx factory level and see if your calculation changes, as those were the only LCI ones which had this EXACT HWEL.

[qbek90]

Car is construction data 19/07,I done calculation for two I-level factory


Update,now I calculated for shipment 18-11-530,target SWFL is another,but number BTLD,still is the same

[DEJMIEN]

I checked that and his radar is FRR-02 even though hw is the same he still needs another ''FRR-02-SP18'' radar which means that it is not possible to flash PRE-LCI radar to LCI SP18, unless there is a magician here who can figure it out.

[maksymw]

I already tried to make FRR-02 on FRR-02-SP18. Don't try to do this. My two attempts killed two radars, after that there was no communication with ecu in Esys... I don't think anyone has managed to do it.

[Ghostly]

I already tried to make FRR-02 on FRR-02-SP18. Don't try to do this. My two attempts killed two radars, after that there was no communication with ecu in Esys... I don't think anyone has managed to do it.

There is a guy that recovers them with programmer.
Looking for a solution too, processor seems to be protected with password.

[qbek90]

Hi,I changed FRR for LCI and is OK.
Thx all.