Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi EML on VCDS Error: P2015
06-09-2023, 15:24 PM,
Post: #1
|
|||
|
|||
Audi EML on VCDS Error: P2015
Hi everyone.
my wife has an Audi A3 model 2009 2.0 TFSI CCZA engine. Yesterday she rang me that she has the EML on. I checked it with VCDS and we got the error: 008213 - Intake Manifold Flap Position Sensor (Bank 1) P2015 - 000 - Implausible Signal - MIL ON The code is now deleted and the EML is gone, but this is the 2nd time the EML has appeared and I`d like to have it fixed. Any ideas? Do I need to change the entire manifold? Thank you |
|||
06-09-2023, 17:00 PM,
Post: #2
|
|||
|
|||
RE: Audi EML on VCDS Error: P2015
is the common prob on that engines
you can see with vcds if your potentiometer read correct the position of flaps and if is possible re-calibrate.if you are lucky you replace sensor-calibrate-done. in the bad case who have good sensor then some internal flaps problem (stuck or broken). the easy way is to remove and delete it from ecu sw. |
|||
06-09-2023, 17:18 PM,
Post: #3
|
|||
|
|||
RE: Audi EML on VCDS Error: P2015
(06-09-2023, 17:00 PM)pandokrator Wrote: is the common prob on that engines That’s a problem Is my wife’s car and she doesn’t want anything deleted. Is a nice engine as it is, but I wanted to delete the charcoal canister as well but she says NO. So I guess my only option here is to replace the manifold? Is the manifold coming with the flaps? Thanks |
|||
06-09-2023, 17:45 PM,
Post: #4
|
|||
|
|||
RE: Audi EML on VCDS Error: P2015
so if the "big boss" dont wanna delete it then start with cheapest way,
take a new one sensor ,calibrate and drive. if error come back again then remove manifold and check if the flaps stuck-broke. on the last and more expensive case you can see in attachment |