Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Changed ZGW lots of error in ISTA
25-09-2023, 21:30 PM,
Post: #7
|
|||
|
|||
RE: Changed ZGW lots of error in ISTA
(25-09-2023, 21:24 PM)user_530d Wrote: You need KCAN2 from ZGW and you can’t use the old controller. You need also new controller connected to KCAN2. Ok, guess i'll switch over the controller aswell then, to bad i didn't order 0.35mm2 Yellow/red and Yellow/brown cables for the K-Can2 High and K-Can2 Low (I recently ordered a lot of 0.35mm2 dual color cable from Germany) I like to do things properly |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Changed ZGW lots of error in ISTA - by Haug530d - 25-09-2023, 15:45 PM
RE: Changed ZGW lots of error in ISTA - by Haug530d - 25-09-2023, 20:53 PM
RE: Changed ZGW lots of error in ISTA - by user_530d - 25-09-2023, 21:00 PM
RE: Changed ZGW lots of error in ISTA - by Haug530d - 25-09-2023, 21:07 PM
RE: Changed ZGW lots of error in ISTA - by user_530d - 25-09-2023, 21:24 PM
RE: Changed ZGW lots of error in ISTA - by Haug530d - 25-09-2023, 21:30 PM
RE: Changed ZGW lots of error in ISTA - by connector - 25-09-2023, 21:29 PM
RE: Changed ZGW lots of error in ISTA - by Haug530d - 26-09-2023, 17:01 PM
RE: Changed ZGW lots of error in ISTA - by user_530d - 26-09-2023, 17:59 PM
RE: Changed ZGW lots of error in ISTA - by Haug530d - 26-09-2023, 20:40 PM
RE: Changed ZGW lots of error in ISTA - by Siki78 - 27-09-2023, 05:19 AM
RE: Changed ZGW lots of error in ISTA - by Haug530d - 27-09-2023, 06:57 AM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content