[bmwcoder75]

There you go, I compiled this document for you guys.

This is my own method. Many other VPN clients available, or can be done via home router too.
Especially useful when remote client does not have E-Sys or you do not want the remote client to see how you do.

I was able to compile this doc and make my own procedure thanks to some posters who helped out by pointing me to the right direction.

Thanks and Rep appreciated

April 2019 : Updated document././.

[CeyLive]

Great idea.
Thanks

[bmwcoder75]

So what do you think guys, any good to you?

[Vojno]

Good job!

Can you use with ICOM to?

[Twoone]

Good job!

Can you use with ICOM to?

Yes you can,  instead of zwg search use itoolradar to find IP of the car/ICOM and use that IP and Lock ICOM with Itoolradar

[bmwcoder75]

Good job!

Can you use with ICOM to?

Yes sure should be, as long as remote PC uses iToolradar to lock it for Esys use

[larshutten]

Will test this soon thanks!

[bmwcoder75]

Good job!

Can you use with ICOM to?

Yes sure should be, as long as remote PC uses iToolradar to lock it for Esys use

---

Will test this soon thanks!

Let us know!
I use this regularly, works very well

[oceandiver86]

thanks for the guide.
how stable is it over VPN?
If internet connection is good, did you try to program over it?

[bmwcoder75]

thanks for the guide.
how stable is it over VPN?
If internet connection is good, did you try to program over it?

You can always do it, but risky. Rate is slower for sure. Even for coding it takes 2-3 times more time.
I would not chance it, especially for doing Bootloaders
If you need to flash ECU, better off installing ESYS locally, does not need to be version with Token, basic E-Sys will do for flash.

---

People who ask me to send password, make sure your Inbox has enough room, cause you ain't getting the password
Ask me again after you cleared your inbox, I can't keep track