Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Original ICOM NEXT can't connect with ISTA+
16-10-2023, 23:01 PM,
Post: #1
|
|||
|
|||
Original ICOM NEXT can't connect with ISTA+
Hello,
I bought new original ICOM Next directly from Dealer. When I first time connected, I wanted to do diagnostic using ISTA+ 4.39.20. Connection manager shows me "Firmware" status. I performed firmware update to 04-22-21 and reboot after that. Then i checked connection status in ITool Radar and run ISTA connection. Ista can't detect ICOM. I noticed that, Itool Radar shows ICOM free status till I run ISTA Connection Manager. Then ISTA can't detect ICOM and ICOM in ITool Radar disappears. If I turn off ISTA's connection manager and reconnect OBD plug of ICOM, ITool Radar is showing free status again. Then I updated firmware to 04-23-10, but still the same, no change. When I connect ICOM to car, SYSTEM green light is blinking, when I connect also LAN cable, SYSTEM lights green and LAN green light is blinking. ISTA still work with ENET cable. Maybe someone had similar problem? |
|||
16-10-2023, 23:33 PM,
Post: #2
|
|||
|
|||
RE: Original ICOM NEXT can't connect with ISTA+
(16-10-2023, 23:01 PM)Rellinge Wrote: Hello, in administration, you selected Dealer Org / ENET local area? make sure ICOM is configured correctly with DHCP in web manager. |
|||
18-10-2023, 08:47 AM,
Post: #3
|
|||
|
|||
RE: Original ICOM NEXT can't connect with ISTA+
Maybe an IP setting, that prevents IStA from seeing the ICOM.
ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
19-10-2023, 17:43 PM,
Post: #4
|
|||
|
|||
RE: Original ICOM NEXT can't connect with ISTA+
(16-10-2023, 23:33 PM)bmchicago Wrote:(16-10-2023, 23:01 PM)Rellinge Wrote: Hello, "In administration you mean vehicle interface in ISTA? Then yes, it is set as "Dealer organisation ICOM/ENET local area network". In web manager is set with DHCP, but I'm not sure if it is correct. It is my first ICOM, so I have not configured it yet. Can you look at this? Photo attached. (18-10-2023, 08:47 AM)tste1982 Wrote: Maybe an IP setting, that prevents IStA from seeing the ICOM. In windows setting, ethernet is set as IP: 169.254.1.1 and subnet mask: 255.255.0.0. I am sorry for the long response time.. |
|||
20-10-2023, 17:49 PM,
Post: #5
|
|||
|
|||
RE: Original ICOM NEXT can't connect with ISTA+
Use static IP with ICOM LAN settings.
Click Thanks and Reputationif this post helped you.
|
|||
Reputation: +1 - Rellinge [+1] | |||
22-10-2023, 09:22 AM,
Post: #6
|
|||
|
|||
RE: Original ICOM NEXT can't connect with ISTA+
Thanks a lot, issue solved!
|
|||
22-10-2023, 09:27 AM,
Post: #7
|
|||
|
|||
RE: Original ICOM NEXT can't connect with ISTA+
Just don't try to flash certain ethernet units on G+ series with static IP...
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content