Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. ATM - Balkan

    atm balkan file service
  2. MHR TuninG

  3. MOD FILES

  4. TPT TUNING

  5. Soft Platform



FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
31-05-2016, 21:16 PM, (This post was last modified: 18-04-2017, 15:42 PM by Clusters.)
Post: #31
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(22-05-2016, 00:20 AM)Enabled Wrote:  
(21-05-2016, 17:14 PM)mauroxj Wrote:  Hi,

the guys who did the upgrade, can you tell us the real advantages and/or differences after and before upgrade?

Thanks

The 0386 version of the program has a modification that forces a rollback on your PC's clock in order to work properly. Quite annoying.

The 0475 doesn't seem to be perfect either, as I have to run the program twice for it to work. Run it once and the program doesn't have the buttons available (gray buttons). I exit and run the program again and then it all works properly. Maybe it's because I haven't yet reworked mine, who knows.

thanks.. and about cars listed there is a change also?
Quote this message in a reply
11-06-2016, 17:59 PM,
Post: #32
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Can I ask to you a question? In folder fix475 is a lot file, some use DTR TRS and some No use DRT_TRS what kind of file is + right? I see also 2 file ( no and yes) FGTECH 0475 WITH USE DTR RTS 1.10. Can i use This file? Me tips? TKS Fantomel.

Vai avanti, anche quando tutti si aspettano che lasci perdere.
Go ahead, even when everyone expects you to lose.
Quote this message in a reply
27-06-2016, 03:22 AM,
Post: #33
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(11-06-2016, 17:59 PM)Multipla2009 Wrote:  Can I ask to you a question? In folder fix475 is a lot file, some use DTR TRS and some No use DRT_TRS what kind of file is + right? I see also 2 file ( no and yes) FGTECH 0475 WITH USE DTR RTS 1.10. Can i use This file? Me tips? TKS Fantomel.

The files are "different" because of the method and options that were used to extract.

However if you compare the dumps in a hexviewer, you will see they are 100% identical. So it doesn't matter which you use.
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
27-06-2016, 08:56 AM,
Post: #34
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
All those files are the same, are just proof that they were extracted using different drivers and different options checked in program. all of them worked, as proof is there. The only problem is the ttl adapter implementation + nxp lock that can be checked also.

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Quote this message in a reply
[+] 2 users say Thank You to fantomel for this post
02-07-2016, 03:49 AM,
Post: #35
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I have to say. The new update is perfect. I was wrong above saying that the buttons remain gray and I have restart the program. No, just have to let it sit and wait a little longer, then the usual popup message comes and it all works.

I am very pleased with my Galletto tool now. I have done a large variety of ECUs and have had success with them all. It is now my go to interface for reading an ecu.. especially bench reading.
If only my CarProg was this good.
Quote this message in a reply
06-09-2016, 12:02 PM,
Post: #36
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
It see usb port fgtech but soft not see and wokk true.


Attached Files Thumbnail(s)
   
Quote this message in a reply
24-09-2016, 21:31 PM,
Post: #37
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Thanks fantomeladorecongratscongrats !!!

have my Galetto V54 Successfully flashed with USB to RS232 TTL UART PL2303HX and flash magic software .
new V54 0475 no time back software running Super on Microsoft Windows 10 64bitroflbiggrin.

Really good work , thank you.


Attached Files Thumbnail(s)
   
Quote this message in a reply
[+] 1 user says Thank You to carhack2.0 for this post
28-09-2016, 20:34 PM,
Post: #38
XZBMW  RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
He

can you have some DIY or step by step how to do it ? I bought a usb dongle you wrote about but dont know what to do with it
Quote this message in a reply
01-10-2016, 04:18 AM,
Post: #39
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Did you download the pack? It tells you how in there.
Quote this message in a reply
01-10-2016, 04:20 AM,
Post: #40
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(01-10-2016, 04:18 AM)Enabled Wrote:  Did you download the pack? It tells you how in there.

You expect people to read before posting? rolling

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.


Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 3 users say Thank You to Clusters for this post


Possibly Related Threads...
Thread Author Replies Views Last Post
XZBMW Need 525d original dump file PelsonBMW 2 104 16-05-2019, 08:18 AM
Last Post: PelsonBMW
LFord Need checksum Ford Sid803 dump lupu2007 1 83 12-05-2019, 13:19 PM
Last Post: yudon
  help to program Xprog Atmega64a with UPA 1.3v USB jonazizbey 1 80 03-05-2019, 18:04 PM
Last Post: targa9
2default_avatar FGtech galletto 2 key/code free calculation anoying 20 5,439 02-05-2019, 13:46 PM
Last Post: r0my81
XZBMW BMW 530xd F11 0281019998 - need full ori dump gif_kuba 2 109 01-05-2019, 07:05 AM
Last Post: gif_kuba
  writing dcm6.2 fgtech meccano85 1 112 29-04-2019, 01:59 AM
Last Post: marcobh5
  Dump BDM for 0281012710 Opel Zafira sapopt 1 123 22-04-2019, 07:16 AM
Last Post: Jancss
  Need ord bdm dump from a6 03l906019 AH harry5858 2 89 20-04-2019, 08:17 AM
Last Post: harry5858
1Bosch bosch edc17c69 with galletto v54/ktag Roby 4 166 19-04-2019, 18:59 PM
Last Post: Roby
0Immo Help to work with a dump of Airbag, Key, Immo jonazizbey 0 65 16-04-2019, 14:35 PM
Last Post: jonazizbey

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content