Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ENET Connection error in ISTA
03-11-2023, 12:32 PM,
Post: #11
|
|||
|
|||
RE: ENET Connection error in ISTA
I once had same issue with ISTA. Car showed up in connection manager, but when doing full identification, it failed. I used EDIABAS Konfigurator 2.0 to set ENET (second, lower one in the list) configuration and after that, all worked well.
|
|||
03-11-2023, 18:11 PM,
(This post was last modified: 03-11-2023, 18:24 PM by mcrussell.)
Post: #12
|
|||
|
|||
RE: ENET Connection error in ISTA
(03-11-2023, 12:32 PM)Raimo5 Wrote: I once had same issue with ISTA. Car showed up in connection manager, but when doing full identification, it failed. I used EDIABAS Konfigurator 2.0 to set ENET (second, lower one in the list) configuration and after that, all worked well. Thanks I will give that a try, its strange through as its always worked fine (03-11-2023, 18:11 PM)mcrussell Wrote:(03-11-2023, 12:32 PM)Raimo5 Wrote: I once had same issue with ISTA. Car showed up in connection manager, but when doing full identification, it failed. I used EDIABAS Konfigurator 2.0 to set ENET (second, lower one in the list) configuration and after that, all worked well. I noticed Konfigurator offers 2 different port options: Diagnostic Port 50160 Control Port 50161 Diagnostic Port 6801 Control Port 6811 Using easyConnect it only uses: Diagnostic Port 50160 Control Port 50161 So if you use the 6801 port would it still be visable in ISTA Connection Manager or would you only be able to use the EDIABAS.INI option in the ISTA Interface page? |
|||
04-11-2023, 17:11 PM,
Post: #13
|
|||
|
|||
RE: ENET Connection error in ISTA
Port 50160/50161 is for ICOM
Port 6801/6811 is for ENET Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content