[ruben_17non]

Hello
I have evo and roof atm Retrofit 
What is best way for make working remotes services?


Account is ok, i receive SMS for actívate in bench.
Fsc is fsc with my Vin not atm vin.
But have RTTI solution of femtoevo with atm vin.

All work but remote and SMS not work

I need plug emulator in ATM canbus?
In CAS or evo not is need emulator?


With femtoevo fsc can work or need original fsc with vin match with ATM?
Sorry my english.

[gabur431]

Hi,

im on my way to retrofit ATM im my F10 LCI,

so i understand that you need an ATM with working Services and in NBT EVO must have all FSC with the VIN from ATM and coding as well with VIN from ATM and you need a emulator ( canfilter ) to avoid VIN missmatch from CAS / FEM etc. so the Navigation is enabled if you have VIN from ATM in EVO and the Rest of the car with Original VIN.

[ruben_17non]

Hi,

im on my way to retrofit ATM im my F10 LCI,

so i understand that you need an ATM with working Services and in NBT EVO must have all FSC with the VIN from ATM and coding as well with VIN from ATM and you need a emulator ( canfilter ) to avoid VIN missmatch from CAS / FEM etc. so the Navigation is enabled if you have VIN from ATM in EVO and the Rest of the car with Original VIN.

Yes.
But im not sure if is need emulator in canbus of ATM

[Chillmeister]

Hi,

im on my way to retrofit ATM im my F10 LCI,

so i understand that you need an ATM with working Services and in NBT EVO must have all FSC with the VIN from ATM and coding as well with VIN from ATM and you need a emulator ( canfilter ) to avoid VIN missmatch from CAS / FEM etc. so the Navigation is enabled if you have VIN from ATM in EVO and the Rest of the car with Original VIN.

Yes.
But im not sure if is need emulator in canbus of ATM

Yes you need Can Filter also in Can2 of ATM. If not Cafd will delete every Time Ignition is turned on

[gabur431]

the ATM and NBT EVO should have the same I-Level or the newest I-Level on it to work good together i was reade a week ago in some Forum, i don't know exactly if this i a muss or not.

Another thing is the Canfilter have to connect on clamp 30F this can be found on IHKA Klima on the F10 LCI, to have Work with My BMW app Lock and Unlock Vehicle after the Car goes to sleep.

Plug IHKA A95*2B
PIN1 12V
PIN2 Ground

If the Emulator Canfilter is connected to EVO Quadlock Power and Ground the Unlock and Lock Vehicle with My BMW App dont work after the car goes in to sleep mode.

The ATM have to flash ( if needed ) and code with Original VO/FA from ATM

and the Coding for NBT EVO is: 6AE - Teleservices

IPCE_WEBSERVER: aktiv [01]
SETTINGS_TIME_AUTOMATIC: online [01]
A4A_KML: aktiv [01]
A4A_PIA: aktiv [01]
CLOCK_CHANGE_AUTOMATIC: aktiv [01]
REMOTE_HMI: aktiv [01]
A4A: aktiv [01]
A4A_REMOTE_APPS: aktiv [01]
A4A_STT_SPELLER_INPUT: aktiv [01]
AUX1_IN_HU: initwert [FF]
DAB_JOURNALINE: aktiv [01]
A4A_ANDROID: aktiv [01]
A4A_WIRELESS_IOS: aktiv [01]
A4A_WIRELESS_ANDROID: aktiv [01]
TELEMATIC_ECU: atm [03]
PIM_NAVI_TO_MEETING_LOCATION: aktiv [01]
ONLINE_SERVICES: aktiv [01]
ONLINE_SERVICES_GLS: aktiv [01]
TELEX: aktiv [01]
ASSIST: aktiv [01]
SWUP_SOURCE_ONLINE: aktiv [01]
PIM_NEW_ELEMENT_EMAIL: aktiv [01]
PIM_NEW_ELEMENT_SMS: aktiv [01]
PIA_A4A: aktiv [01]
CONTACT_ONLINE_ADDRESS_VALIDATION: aktiv [01]
SYSTEM_GPS_RECEIVER: nicht_aktiv [00]
TPEG_TAP: aktiv [01]

If i miss something please tell me

[user_530d]

Which canfilter do you use. Do you have a link?
You use myBMW app with your VIN or donor VIN.

[Jalami]

Is it necessary to use canfilter in ATM.?

[ruben_17non]

Is it necessary to use canfilter in ATM.?

Yes

---

Finally work!
I only put one emulator in ATM and code with donor VIN.

Evo is activated with my VIN fscs but with RTTI VIN of ATM

---

Pd: horn in remote services not are available?

[kuno24]

Can anyone enlighten me, what would it take, to make NBT Evo to work with TCB?
I am asking, because I did a Evo upgrade on a F10 LCI, car has all Teleservices, Concierge etc enabled from factory.
TCB was not (yet) upgraded to ATM.
The remote services (doors, horn, lights, ventilation) all still work as TCB sends those commands directly to K-CAN.
Also tried to connect the TCB USB to the free USB2 on Evo, but that brought nothing.
Can the Evo be configured to recognise TCB on USB, instead of looking for ATM on OABR?
Or is there something more missing on the QNX side??
E-mailed the makers of ATM Emulator at CarSystems, but their box only provides GPS interface to the EVO, not the modem interface from the TCB.
Is it a big technical challenge to translate from TCB's USB to OABR??

[gabur431]

Which canfilter do you use. Do you have a link?
You use myBMW app with your VIN or donor VIN.

i use an canfilter from carsystems, and iin MyBMW app is Donnor VIN from ATM.