[Bateser62]

Is it possible to match this cluster and ecu with the info provided ? I have been trying with carprog clone but info changes every read.    
VDO H80  8PO920981B
MILEAGE. 186453
NEED. 112000
IMMO S/N  AUX7Z0F0FNU058
KEY. UM1 40 A5 10 22 LOCKED
    UM2. 19 4B 00 01 A4 10 72 65
ID. E1 04 5F 2A
EDC16U1 03G906016BA
PIN. 56979
MAC. 2F 07 14 FF
CS. C1 1B 24 A1 82 36 49
VIN. WAUZZZ8P56A160619
IMMO NUMBER AUX7Z0E5FNL00J

[km666]

What did you change ECU,or dash?

[Bateser62]

I changed the dash. I currently have immo off .

[ltujustas]

I changed the dash. I currently have immo off .

Best solution for you immo off. Becouse you need new chip for key or if possible unlock same than write new chip to cluster

[km666]

This dash work only via OBD2 .93C86 crypted,
Read security data from old dash with carprog, or AVDI,FVDI.
Write  the data in the new dashboard with carprog.
you don't need a new chip.

[Bateser62]

Cheers for your help bud , old dash was a different ( wrong unit ) but i tried this one today and somebody had been into it. Engine management light covered over and the fuel gauge not working. But thanks for your help.

---

Thread now closed, thanks for your help guys.