Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]

ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
17-12-2023, 18:38 PM,
Post: #1
ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
Hello,

I have several non-functional IDrive controllers from E-series CIC (ZBE or CON) with рдят number 9334611. They do not communicate at all but I cannot find any fault on the boards, so it looks like a software issue.
   

They are based on S9S12P128 0M01N (Secured). I cannot find programmer that is able to read this chip without erasing it first.
   

I was not able to find bin anywhere but read that it may be possible to extract the bin file from the 0pa file.
I'm attaching 9334611A.0pa which should contains the bin file in "intel hex" format. 
9334611A.zip
File Type: .zip
Downloaded: 6 times
Size: 47.32 KB



Regards,
Quote this message in a reply
18-12-2023, 09:39 AM,
Post: #2
RE: ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
It's possible, but it's not the full binary. I mean 0pa is only the program рдят (0ba = bootlоаdёя, 0pa = program, 0da = data(constants) рдят). And even if there are all 3 рдят5 0ba,0pa, and 0da, it can be a not full binary, because there is also a boot рдят that is written from the factory and doesn't update with WinKFP/ё5у5.
Quote this message in a reply
19-12-2023, 16:32 PM,
Post: #3
RE: ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
(17-12-2023, 18:38 PM)kalosbg Wrote:  Hello,

I have several non-functional IDrive controllers from E-series CIC (ZBE or CON) with рдят number 9334611. They do not communicate at all but I cannot find any fault on the boards, so it looks like a software issue.


They are based on S9S12P128 0M01N (Secured). I cannot find programmer that is able to read this chip without erasing it first.


I was not able to find bin anywhere but read that it may be possible to extract the bin file from the 0pa file.
I'm attaching 9334611A.0pa which should contains the bin file in "intel hex" format. 


Regards,

try to reflash with їсош

[їшяgё: GIF-Bandiera-Italiana.gif]
Quote this message in a reply
19-12-2023, 19:18 PM,
Post: #4
RE: ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
(18-12-2023, 09:39 AM)pRoxxxDD Wrote:  It's possible, but it's not the full binary. I mean 0pa is only the program рдят (0ba = bootlоаdёя, 0pa = program, 0da = data(constants) рдят). And even if there are all 3 рдят5 0ba,0pa, and 0da, it can be a not full binary, because there is also a boot рдят that is written from the factory and doesn't update with WinKFP/ё5у5.

Thank you for the great explanation!


ANGEL, unfortunately the device doesn’t response at all.
Quote this message in a reply
19-12-2023, 19:31 PM,
Post: #5
RE: ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
seems that xprog can

[їшяgё: GIF-Bandiera-Italiana.gif]
Quote this message in a reply
20-12-2023, 13:22 PM,
Post: #6
RE: ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
(19-12-2023, 19:31 PM)____ANGEL___ Wrote:  seems that xprog can
As I know there is no E series dump for ZBE because MCU is read protected, the only dumps from ZBE I saw are from F series.
Quote this message in a reply
20-12-2023, 14:51 PM,
Post: #7
RE: ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
this is the ecology, you have to buy brand new рдят because old one has corrupted firmware

i would try to flash with kdcan using nfs
Quote this message in a reply
21-12-2023, 20:56 PM,
Post: #8
RE: ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
they broke because of kdcan flashing... kdcan chinese fw is the cause

[їшяgё: GIF-Bandiera-Italiana.gif]
Quote this message in a reply
22-12-2023, 08:07 AM,
Post: #9
RE: ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
(21-12-2023, 20:56 PM)____ANGEL___ Wrote:  they broke because of kdcan flashing... kdcan chinese fw is the cause

Chinese k-dcan can't transfer big blocks of data(255 bytes), they do it sometimes with trash, and winkfp doesn't double check what was written, so when it checks signature at the end of flash it fails. For example xhp works with chinese kdcans, because it will rewrite data until it will match.But this has nothing to do with this thread, because you cant kill ECU with Chinese d-can it will still communicates. So please, stop flooding about thing that you don't know.
Quote this message in a reply
22-12-2023, 09:04 AM,
Post: #10
RE: ZBE (IDrive Controller) bin file needed. Is 0pa to bin possible?
(22-12-2023, 08:07 AM)pRoxxxDD Wrote:  
(21-12-2023, 20:56 PM)____ANGEL___ Wrote:  they broke because of kdcan flashing... kdcan chinese fw is the cause

Chinese k-dcan can't transfer big blocks of data(255 bytes), they do it sometimes with trash, and winkfp doesn't double check what was written, so when it checks signature at the end of flash it fails. For example xhp works with chinese kdcans, because it will rewrite data until it will match.But this has nothing to do with this thread, because you cant kill ECU with Chinese d-can it will still communicates. So please, stop flooding about thing that you don't know.

If i don't know things, why i have suggested to use їсош? How can i know that kdcan can't flash zbe and some others ecu? If you have only kdcan you will deal with a broken zbe for software issue. Stop assuming that you're better than other people. I was responding to a wrong suggestion wich is "use kdcan". If u use bїшшёяgeeks works, or ёdїдbд5lib works, chinese not. And if you have only kdcan you have a piece of crap instead of a zbe. Zbes about this thread are not responding like the op says, so only mcu solutions are possible.

[їшяgё: GIF-Bandiera-Italiana.gif]
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  їсош Next How to Hardware reset (correct bin file ?) Fraizer 23 8,656 06-10-2026, 13:03 PM
Last Post: Supermariosrub
  f5с file needed to resolve SWT-error kenza750 10 365 30-09-2026, 11:17 AM
Last Post: kenza750
  F/G reset SWFL file with ё_5у5 - free gift from Bahram Akhundov foxportal 30 9,909 29-09-2026, 16:28 PM
Last Post: bushido1992
  Need FA.SSD file from VIN please number7 1 94 29-09-2026, 11:03 AM
Last Post: Nikmd
  MGU error upload Provision file Siki78 10 624 28-09-2026, 06:41 AM
Last Post: jb2005
  Looking for BMW DME8FF_R / DME8.x A2L (ASAP2) File for High-Speed RAM Telemetry Mappi Rolzs 5 419 23-09-2026, 13:07 PM
Last Post: Rolzs
  CBB ECU validation file needed kenza750 11 348 20-09-2026, 11:39 AM
Last Post: kenza750
  CBB result file request mohb1 3 202 03-09-2026, 17:18 PM
Last Post: Ryzen
  BMW E70 need FA ssd file obkaza 1 76 02-09-2026, 05:29 AM
Last Post: jaramillo
  S58 MG1 backup needed dominpl 4 388 30-08-2026, 02:42 AM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content