Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Bmw X6 2015
19-12-2023, 20:56 PM,
Post: #1
XZBMW  Bmw X6 2015
Hello to everyone, today i have at my workshop an bmw x6 from 2015 f16....
I do it for the customer odometer corection... all goes good till i want to start the car... car starts and put ign on, only if i put key in slot (near steering column) ... first time i was think that it s normal, but after i tried also with new key battery and still no luck
All the job was perfomed by DP4 ,all with succes ... everything it s fine, no erros on dash, odometer it s fine, but only this thing it s strage....
I will try tommorow an programing with esys, an update ...
Maybe some one has in the past this problem ? could u help me with some advice ? thx in advice!!!!
Quote this message in a reply
19-12-2023, 23:16 PM,
Post: #2
RE: Bmw X6 2015
write original files and see if problem goes or not

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 1 user says Thank You to volavka for this post
20-12-2023, 11:39 AM,
Post: #3
RE: Bmw X6 2015
(19-12-2023, 20:56 PM)Liveros Wrote:  Hello to everyone, today i have at my workshop an bmw x6 from 2015 f16....
I do it for the customer odometer corection... all goes good till i want to start the car... car starts and put ign on, only if i put key in slot (near steering column) ... first time i was think that it s normal, but after i tried also with new key battery and still no luck
All the job was perfomed by DP4 ,all with succes ... everything it s fine, no erros on dash, odometer it s fine, but only this thing it s strage....
I will try tommorow an programing with esys, an update ...
Maybe some one has in the past this problem ? could u help me with some advice ? thx in advice!!!!

 inject cafd in bdc...most probability is that your tool delete coding file from bdc
need to use e-sys
if that doesnt work than your bdc is corupted
Quote this message in a reply
20-12-2023, 13:48 PM, (This post was last modified: 20-12-2023, 14:40 PM by Liveros.)
Post: #4
RE: Bmw X6 2015
(20-12-2023, 11:39 AM)cipi gutuie Wrote:  
(19-12-2023, 20:56 PM)Liveros Wrote:  Hello to everyone, today i have at my workshop an bmw x6 from 2015 f16....
I do it for the customer odometer corection... all goes good till i want to start the car... car starts and put ign on, only if i put key in slot (near steering column) ... first time i was think that it s normal, but after i tried also with new key battery and still no luck
All the job was perfomed by DP4 ,all with succes ... everything it s fine, no erros on dash, odometer it s fine, but only this thing it s strage....
I will try tommorow an programing with esys, an update ...
Maybe some one has in the past this problem ? could u help me with some advice ? thx in advice!!!!

 inject cafd in bdc...most probability is that your tool delete coding file from bdc
need to use e-sys
if that doesnt work than your bdc is corupted

i recode with e-sys , no change, i programing i level, no change

(19-12-2023, 23:16 PM)volavka Wrote:  write original files and see if problem goes or not

no change with original state files ...still this problem

any ideea ? maybe i corupted eeprom ? can anyone to verify that ?

any ideea ? maybe i corupted eeprom ? can anyone to verify that ?
Quote this message in a reply
20-12-2023, 22:14 PM,
Post: #5
RE: Bmw X6 2015
Post original and calc dump of 95256

BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416  ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series

Quote this message in a reply
[+] 1 user says Thank You to BMWzone for this post
21-12-2023, 14:01 PM,
Post: #6
RE: Bmw X6 2015
(20-12-2023, 22:14 PM)BMWzone Wrote:  Post original and calc dump of 95256


i have only eep backup


Attached Files
BDC_2023_12_19-14_33.rar
File Type: .rar
Downloaded: 7 times
Size: 4.73 KB

Quote this message in a reply
21-12-2023, 17:24 PM,
Post: #7
RE: Bmw X6 2015
(21-12-2023, 14:01 PM)Liveros Wrote:  
(20-12-2023, 22:14 PM)BMWzone Wrote:  Post original and calc dump of 95256


i have only eep backup

Was this read by BDC before or after problem ?

BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416  ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series

Quote this message in a reply
[+] 1 user says Thank You to BMWzone for this post
21-12-2023, 20:35 PM,
Post: #8
RE: Bmw X6 2015
before ..this is read before problem
Quote this message in a reply
22-12-2023, 12:20 PM,
Post: #9
RE: Bmw X6 2015
The priority was to write this dump after problem, now that the BDC has undergone the flash/upgrade the contents of eprom have changed. Inside the file I found the value that was lost for me, you need to use a tool that clones it and I Can restores the value

BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416  ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series

Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
HPorshe Porsche Macan 2015 Ringo24 0 43 22-04-2024, 06:39 AM
Last Post: Ringo24
  IVECO DAILY 2015 MILEAGE CORRECTION klisenko 0 73 12-04-2024, 15:48 PM
Last Post: klisenko
  iveco daily 2015 95640 24c16 odometer change vaki1989 3 126 10-04-2024, 09:37 AM
Last Post: Clusters
  Solved ✔ Iveco 2015 mileage dash+bcm Lifestyle 1 127 21-03-2024, 15:14 PM
Last Post: Lifestyle
WHyundai Dash Santa fe 2015 Tito 2 132 23-02-2024, 13:31 PM
Last Post: al70
  2015 Toyota Corolla Mileage infinity 1 165 24-01-2024, 10:06 AM
Last Post: wembleyhill
  Solved ✔ mb sprinter 2015 dash adjust gskuvarega 3 314 21-01-2024, 12:00 PM
Last Post: gskuvarega
  Solved ✔ yamaha mt125 2015 mileage adjust TKservice 4 282 13-01-2024, 09:59 AM
Last Post: TKservice
  Audi Q5 2015 mileage adjust software 0567 TKservice 3 272 29-12-2023, 18:44 PM
Last Post: al70
UNissan Solved ✔ nissan mikra k14 2015 mileage lomb 2 170 07-12-2023, 15:57 PM
Last Post: lomb

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content