Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
When the engine is started, the diagnosis is lost BMW E39 530d OBD II
02-01-2024, 19:43 PM,
Post: #1
|
|||
|
|||
When the engine is started, the diagnosis is lost BMW E39 530d OBD II
Hallo
I have a problem with my e39 530d 2000/12 , suddenly a problem appeared when I start the engine, I lose communication, checked on the D-can and icom cable. Pin 1 and 16 are powered ok . Pin 4 and 5 are ground ok. What could be the problem? |
|||
02-01-2024, 19:52 PM,
Post: #2
|
|||
|
|||
RE: When the engine is started, the diagnosis is lost BMW E39 530d OBD II
check to see if the voltage drops during startup and if it doesn't drop, what volts does it drop to
|
|||
Reputation: +1 - al70 [+1] | |||
02-01-2024, 20:42 PM,
Post: #3
|
|||
|
|||
RE: When the engine is started, the diagnosis is lost BMW E39 530d OBD II
(02-01-2024, 19:52 PM)Thomas77 Wrote: check to see if the voltage drops during startup and if it doesn't drop, what volts does it drop to After starting, the voltage increases to the alternator charging voltage |
|||
Reputation: +1 - al70 [+1] | |||
02-01-2024, 20:45 PM,
Post: #4
|
|||
|
|||
RE: When the engine is started, the diagnosis is lost BMW E39 530d OBD II
maybe a problem with your laptop, unplug usb and try again with engine running
|
|||
02-01-2024, 20:58 PM,
Post: #5
|
|||
|
|||
RE: When the engine is started, the diagnosis is lost BMW E39 530d OBD II
(02-01-2024, 20:45 PM)al70 Wrote: maybe a problem with your laptop, unplug usb and try again with engine running I also checked on another laptop with a ds150e interface using the WOW program and when I start engine, I lose communication. |
|||
Reputation: +1 - al70 [+1] | |||
02-01-2024, 21:17 PM,
Post: #6
|
|||
|
|||
RE: When the engine is started, the diagnosis is lost BMW E39 530d OBD II
The early models such as the e39, e46 with iCOM or ODB cable lost communication when start the engine during diagnosis "ISTA or INPA". The e90 is working fine for me.
|
|||
Reputation: +1 - al70 [+1] | |||
03-01-2024, 02:02 AM,
Post: #7
|
|||
|
|||
RE: When the engine is started, the diagnosis is lost BMW E39 530d OBD II
what do you mean you loose communication?
You can communicate with all control units before starting vehicle and after starting engine, loose all communication with all control units or just some control units? What version is your ISTA, ICOM (Genuine or Chinese) and what ICOM firmware? Have you tried VirtualGT1 to see if the same problem exists? |
|||
Reputation: +1 - al70 [+1] | |||
03-01-2024, 07:03 AM,
Post: #8
|
|||
|
|||
RE: When the engine is started, the diagnosis is lost BMW E39 530d OBD II
Do you have aftermarket HID or CREE LED on the car? It might give interference on K-Line. Even poor quality phone charger or dash cam might give such problems.
Always happy to help
|
|||
Reputation: +1 - al70 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content