[corneleones]

I also have a problem with the 4kb focus 2 watch file, when I put it in Ford All in One32 it says incorrect file! The errors are when connecting the scanner, two stable errors are displayed - P1603 - damage to the EEPROM of the engine ECU and U2510 - absence of a request-response of immobilizer data from the engine ECU.I read the edc16c34 BDM ecu eprom with the size of 8kb which I reduced to 2kb.
Can someone repair the eeprom dash so that it can synchronize with the corrupted eeprom in the engine ECU, thank you very much!

[MahoJohn]

I also have a problem with the 4kb focus 2 watch file, when I put it in Ford All in One32 it says incorrect file! The errors are when connecting the scanner, two stable errors are displayed - P1603 - damage to the EEPROM of the engine ECU and U2510 - absence of a request-response of immobilizer data from the engine ECU.I read the edc16c34 BDM ecu eprom with the size of 8kb which I reduced to 2kb.
Can someone repair the eeprom dash so that it can synchronize with the corrupted eeprom in the engine ECU, thank you very much!

hi friend,

here is you test-sync file,
please report back
for pass write me in pm

[elektronik13]

I also have a problem with the 4kb focus 2 watch file, when I put it in Ford All in One32 it says incorrect file! The errors are when connecting the scanner, two stable errors are displayed - P1603 - damage to the EEPROM of the engine ECU and U2510 - absence of a request-response of immobilizer data from the engine ECU.I read the edc16c34 BDM ecu eprom with the size of 8kb which I reduced to 2kb.
Can someone repair the eeprom dash so that it can synchronize with the corrupted eeprom in the engine ECU, thank you very much!

this eeprom should work

pass PM is.txt
File Type:
Downloaded:	4 times
Size:	31 bytes