Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Neet help to flash ZGW-02 High for E91 LCI NBT EVO retrofit
02-02-2024, 18:30 PM,
Post: #1
|
|||
|
|||
Neet help to flash ZGW-02 High for E91 LCI NBT EVO retrofit
Hello everyone,
I want to make an NBT Evo retofit, OM how far it goes on my BMW E91 LCI. I need help flashing ZGW-02 high to ZGW-02 8sk. I would be grateful if someone can help me remotely or with precise information. I also need help with coding and flashing NBT Evo HU to VIN from donor ATM. If anyone can help me with other important information about NBT Evo retrofit in E9X, write to me at PM. Thanks in advance |
|||
13-02-2024, 13:32 PM,
Post: #2
|
|||
|
|||
RE: Neet help to flash ZGW-02 High for E91 LCI NBT EVO retrofit
Hi, you need to change ZGM 8SK has another hardware...
|
|||
15-02-2024, 05:11 AM,
Post: #3
|
|||
|
|||
RE: Neet help to flash ZGW-02 High for E91 LCI NBT EVO retrofit
Did you installed ZGW from F series to E91? It need E-sys and pszdzdata to flash or code any module from F series.
|
|||
16-02-2024, 21:15 PM,
(This post was last modified: 16-02-2024, 21:21 PM by emaflo1978.)
Post: #4
|
|||
|
|||
RE: Neet help to flash ZGW-02 High for E91 LCI NBT EVO retrofit
Can the ZGW-02 VIN be changed from FXX to E9X VIN or does a CAN filter have to be used?
(13-02-2024, 13:32 PM)vikro2000 Wrote: Hi, you need to change ZGM 8SK has another hardware... To understand correctly for NBT Evo retrofit it needs ZGW-02 8sk or 4sk and I have a question: ZGW-02 High flashed to ZGW-02 8sk is only used for flashing and coding on the bench? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content