Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
05-03-2024, 13:54 PM,
Post: #1
|
|||
|
|||
MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
Hi,
is it somehow possible to read out the fault codes and freeze frames of the MED17.7.5 engine controller on the bench. I have just this controller here and need to read the error codes. Can I create a bench setup or read it out directly somehow? Best Regards ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
06-03-2024, 01:28 AM,
Post: #2
|
|||
|
|||
RE: MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
yes it is possible read those on bench,
however you will see other faults once it is powered up, because it fail to connect to those sensors ESP TCU etc. |
|||
06-03-2024, 08:58 AM,
Post: #3
|
|||
|
|||
RE: MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
I‘ve tried the pinout for tuning, but my launch x431 didn‘t recognize the ecu.
Does it need something else? Can you point me in a direction. Thank you. ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
09-03-2024, 09:38 AM,
Post: #4
|
|||
|
|||
RE: MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
Has anybody any hints how to do this?
ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
15-03-2024, 09:34 AM,
Post: #5
|
|||
|
|||
RE: MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
|
|||
15-03-2024, 15:36 PM,
Post: #6
|
|||
|
|||
RE: MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
No, it's a different ECU. It's MED17.7.5 which has 91 and 105 Pins.
ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
15-03-2024, 16:56 PM,
Post: #7
|
|||
|
|||
RE: MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
Hier you pinout
91 pin conector pin 6 end 50 +12 pin 1-GND pin 62 Can H pin 63 Can L between Can L end Can H you need to put a resistance of 120 ohms BR EDDY immo daten transfer
cas dump reparatur cvn fix No help for people not give a feedback |
|||
16-03-2024, 00:35 AM,
Post: #8
|
|||
|
|||
RE: MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
Hi,
didn‘t work. That was my pinout I used before. I can read the file to edit for tuning, but I can‘t read any errors. I need to read the freeze frame of this ecu. ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
16-03-2024, 07:49 AM,
(This post was last modified: 16-03-2024, 07:50 AM by 16eddi67.)
Post: #9
|
|||
|
|||
RE: MED17.7.5 (W222 AMG) Engine controller Diagnostic on Bench
i think you need EZS with key ..........
EZS/ Gateway. BR EDDY immo daten transfer
cas dump reparatur cvn fix No help for people not give a feedback |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content