[adamnewport]

Hi, when I try to connect to the car, I get the error below. When trying to create a TAL I cannot select I-step level. I have psdzdata full from Ista4.45.30. Please advise

[Billyjoe69]

Can you take a picture of your main login Esys window, the target you choose, and confirm your vehicle's series ?

[adamnewport]

It is the same for all mainseries, regardless of which model you want to connect to. I have Iste + with a license and I use its data. It is installed with programming data. Regards

[rocdeng]

Try selecting 'Read parameters from VCM' or fill istep(shipment) info by your self. (recommand read automaticly)

[tste1982]

I think the PSDZ path is not correct

[Node]

I think the PSDZ path is not correct

I agree. ESys wants PSdZ data folder, not folder containing PSdZ data folder...

[Thomas77]

ESYS does not see programming data, check the folder

[rocdeng]

Tried reproduce the issue.
If PSdZ-Data folder is wrong, an error poped-up when starting e-sys.
If Data folder is wrong, no error poped-up.
Do you met any error pop-up when starting e-sys? @adamnewport

I didn't connect to the car, so didn't know whether folder missing will cause the error @adamnewport met.

[adamnewport]

there is no error during startup, so the problem may be in the data folder. What should be there?

[rocdeng]

FYI: I pointed them both to the data_swi folder.