[boweld11]

Hello gentlemen,
I recently had a BMW e39 530d 193 HP at the workshop. The customer replaced the flow meter and after the replacement the car lost power, the economizer does not close, the set values for the current MAF are different. I know that there was a change in these cars and the software had to be updated. I've done a lot of DDE3 via winkfp. Unfortunately, DDE4 crashed at 0%. I managed to download the file via Kess and after the fifth attempt, recovery was successful. Nevertheless, I would like to make this car so that it has power. I have the original file. Would you be able to do this so that I can then upload it with Kess?

thanks!
SW: 1037351761
VIN nr.: WBADL71070GV13427
SW ver.: 7789376

[obdcloud]

just put right MAF Bosch or BMW

[boweld11]

just put right MAF Bosch or BMW

original BMW is installed

[gkogkolos]

Hello gentlemen,
I recently had a BMW e39 530d 193 HP at the workshop. The customer replaced the flow meter and after the replacement the car lost power, the economizer does not close, the set values for the current MAF are different. I know that there was a change in these cars and the software had to be updated. I've done a lot of DDE3 via winkfp. Unfortunately, DDE4 crashed at 0%. I managed to download the file via Kess and after the fifth attempt, recovery was successful. Nevertheless, I would like to make this car so that it has power. I have the original file. Would you be able to do this so that I can then upload it with Kess?

thanks!
SW: 1037351761
VIN nr.: WBADL71070GV13427
SW ver.: 7789376

You will be fine, without maf and power up!

I have send you the password in private message.

regards

[rcatun]

Mafless can be a solution... Did u try unplug the maf and test it? It gets the power back?

BR

[boweld11]

Mafless can be a solution... Did u try unplug the maf and test it? It gets the power back?

BR

yes, the power is back

[gkogkolos]

Enjoy it my friend