Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Problem Retrofit electrified steering column on the G31 LCI
22-03-2024, 10:36 AM,
Post: #11
RE: Problem Retrofit electrified steering column on the G31 LCI
You SURE you buy correct buttons part number??? ETK may give just one, but that does NOT mean there were incompatible buttons before...
Quote this message in a reply
22-03-2024, 12:17 PM,
Post: #12
RE: Problem Retrofit electrified steering column on the G31 LCI
If all button pushings are seen in ISTA (ABL) correct, wiring and button must be ok
Quote this message in a reply
22-03-2024, 12:55 PM,
Post: #13
RE: Problem Retrofit electrified steering column on the G31 LCI
(22-03-2024, 12:17 PM)jaki Wrote:  If all button pushings are seen in ISTA (ABL) correct, wiring and button must be ok

If you would READ the thread, you would see that pushing is registered, but RELEASING is NOT.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Disable active steering e91 xMoses 0 39 Yesterday, 15:42 PM
Last Post: xMoses
  Bmw G31 retrofit Mgu id7 atm problem intranet 20 2,386 Yesterday, 08:06 AM
Last Post: smilo
  Kafas issue aftrer ACC Retrofit It3_Magic 14 596 23-04-2024, 07:44 AM
Last Post: It3_Magic
XZBMW NBT EVO Connected Drive problem after update I-Level SkeYT 47 4,719 22-04-2024, 11:44 AM
Last Post: kwat
  G82 rear tail lights CSL retrofit Sauron 10 784 20-04-2024, 07:35 AM
Last Post: SANYA
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 891 466,288 20-04-2024, 01:05 AM
Last Post: fe7565
XZBMW Neck warmer retrofit Just2fast5 5 380 17-04-2024, 11:20 AM
Last Post: Spirit5676
  ID4 evo to ID6 Evo full retrofit, ATM issues 03178A mitch32 1 181 15-04-2024, 17:52 PM
Last Post: mitch32
XZBMW BMW E84 Cruise control retrofit not workig Alyn546 4 219 12-04-2024, 14:23 PM
Last Post: DieStream
  F10 FLA retrofit beng2k 30 1,041 11-04-2024, 18:43 PM
Last Post: beng2k

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content