[deutsch]

Hi all,

I have a 2009 Nissan cabstar 2.5dci with dead ecu,  I’ve never worked on this type of ecu so need some help advice please.

Ecu number is
4C
23710 MA23D
MB275800-6915  12v

a replacement ecu with exactly the same numbers has been sourced.

I have noticed 93c86 eeprom on the pcb can I just swap that onto the new/used ecu and the van will start.

What are the options, clone Immo off etc.

Thanks

[gskuvarega]

Hi all,

I have a 2009 Nissan cabstar 2.5dci with dead ecu,  I’ve never worked on this type of ecu so need some help advice please.

Ecu number is
4C
23710 MA23D
MB275800-6915  12v

a replacement ecu with exactly the same numbers has been sourced.

I have noticed 93c86 eeprom on the pcb can I just swap that onto the new/used ecu and the van will start.

What are the options, clone Immo off etc.read and save data in 16bit  on original 93c86 and swap after just in case

Thanks

[deutsch]

You can help???

[raffy haddad]

Try this , put donor ecu in car reprogram key and change vin by diag tool