[Bavrian]

Ok got it working

so iv connected the pins in 1-2 in con 9 and as a test and removed the existing wires in those slots and the camera shows up under esys and works on idrive sceeen

So seems a ethernet switch is needed unless anyone has a work around this

---

The

Hello, you code ACSM?
O retrofited same ICAM in f44 and no problem, code 3AG in BDC HU and ACSM.
Car dont have ethernet switch.

Yes acsm was coded

Did your car have MGU or entrynav2 

As all ethernet slots on bdc are taken up on pin 1-2 & 37-38