Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO HW4.1 CheckMemory Error
17-03-2024, 20:58 PM,
(This post was last modified: 17-03-2024, 21:02 PM by moreply.)
Post: #1
|
|||
|
|||
NBT EVO HW4.1 CheckMemory Error
Hi,
i bought an EVO unit (HWEL 2FC3), that was killed by faulty v850 reset. Not visible in esys. Fixed it via UART. Also Unit came without HDD i did use an Intel SSD for Replacement all directories got created everthing is fine. No HDD Error. Maybe SMART is an issue. Bootloader can be flashed to the Unit without an issue, but when i try to flash SWFL or IBA it fails with the Check Memory error. Tried UDS and HTTP. BOOT CFG: ========= TS_INFO=0x4031ef80,0x00000080 HW_REV=eModule,d1,0x8,OMAP5432,ES2.0,4GB IOC_BOOTMODE=2 IOC_BM_INFO=0x40318dc0,0x10 IOC_BM_INFO ptr 0x40318DC0: 32 00 00 00 01 31 FE FF 02 00 00 00 00 53 00 00 SWDL: ----- 32 00 00 00 ONOFF: ------ Wake-Up Reason : 01 => WUR_BOOTLOADER Internal Hardware Index: 3_ BootLoader Indication : _1 => BootLoader Mode Persistent Mode : FE => <UNKNOWN> Error Reset Count : FF IPC Protocol Version : %00000010 IPC Version : %____0010: => Block IPC on Jacinto and OMAP MOST API : %__00____: => Initial MOST API Reserved for future use: 00 RESERVED: -------- 00 00 00 SYSTEM_SETTINGS: ---------------- 53 00 00 description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63 severity: FATAL ERROR Any ideas how to fix this error? Maybe it is the SSD? |
|||
18-03-2024, 20:33 PM,
Post: #2
|
|||
|
|||
RE: NBT EVO HW4.1 CheckMemory Error
For me it looks like BTLD is not compatible with SWFL. SSD has nothing to do with it. You can take it out and flash without IBAD. What files are you using to flash?
Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
19-03-2024, 08:23 AM,
(This post was last modified: 19-03-2024, 08:24 AM by DEJMIEN.)
Post: #3
|
|||
|
|||
RE: NBT EVO HW4.1 CheckMemory Error
If it’s fails on SWFL 271A it’s means your ssd or dvd drive. Post the esys log here.
• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
19-03-2024, 08:56 AM,
(This post was last modified: 19-03-2024, 08:57 AM by moreply.)
Post: #4
|
|||
|
|||
RE: NBT EVO HW4.1 CheckMemory Error
Yes Fails on 271A. DVD Drive seems seems not responssive but might be the Missing SWFL.
SSD also big ?. No erros but it might no like it. Code: [HU_NBT2 - 63 - swfl_0000271a-006_016_002] Transaction type: swDeploy; Message: 2% Fortschritt bei ECUId:HU_NBT2_0x63 [0% von swfl_0000271a-006_016_002] [TRANSACTION] |
|||
19-03-2024, 09:36 AM,
Post: #5
|
|||
|
|||
RE: NBT EVO HW4.1 CheckMemory Error
|
|||
19-03-2024, 09:47 AM,
Post: #6
|
|||
|
|||
RE: NBT EVO HW4.1 CheckMemory Error
AJ ist correct 2FC3 DAB and no GPS. Unit has exactly this state.
|
|||
19-03-2024, 11:41 AM,
Post: #7
|
|||
|
|||
RE: NBT EVO HW4.1 CheckMemory Error
So it failes on every SWFL or only 271a? Because from your subject I understood that it failes on every SWFL. But if only 271a then looks like locked DVD (like with medium inside but without) or dead DVD
Only BMW services:
Remote coding/programming - E, F, G serie HDD change, Carplay, Screen mirroring activation FSC pack - CIC, NBT, NBT EVO, ENTRYNAV2, MGU, KAFAS Remote reset 8HP ISN F serie ELV disable for CAS3, 3+ |
|||
19-03-2024, 15:10 PM,
Post: #8
|
|||
|
|||
RE: NBT EVO HW4.1 CheckMemory Error
probably your HDD is not initialized correctly, or doesn't work with EVO.
also might be faulty DVD. try removing DVD and HDD from adj, remove them from unit and flash, do not flash ibads of course. failing SWFL 271A means that there is hardware mismatch with adj MGU Patching/Virginizing.
Feature Installer codes. Physical NBT EVO Repairs. CarPlay activations. Remote BMW Coding. [email protected] |
|||
19-03-2024, 15:25 PM,
Post: #9
|
|||
|
|||
RE: NBT EVO HW4.1 CheckMemory Error
Are you calculating the TAL or are you using a custom TAL? If calculating, are there any errors?
Finally, I suggest doing a Clear V850 and performing a new flash, initially without the Ibad. |
|||
19-03-2024, 16:57 PM,
Post: #10
|
|||
|
|||
RE: NBT EVO HW4.1 CheckMemory Error
(19-03-2024, 15:10 PM)RuleNormaliai Wrote: probably your HDD is not initialized correctly, or doesn't work with EVO. I actually used your guide to set it up, maybe i did something wrong But should be there an error then? Do you have the right SSH Commands maybe? I know helloevo and the syntax. But not the right Commands. Problem is HUE wont work due to missing VIN. V850 was cleared several times, its not the issue. Started from scrachts 5 times . Tal is ok |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content