Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. New Emulator

  2. Immo Bypass

  3. Julie Emulator

  4. AUTO-CHIPS

  5. Ecu-Service



Reflash lexia interface from B to C
03-01-2016, 11:33 AM,
Post: #31
RE: Reflash lexia interface from B to C
(28-07-2015, 10:27 AM)mattydr67 Wrote:  The serial it is allready blacklisted in the DB v7.66 and on in fw 4.3.3
All things that fly for free then it can be killed
Good luck

Hi mattyde67,
Is this nlc serial different from the ones on the clones? Wouldn't all the clones have the same serial; and it is easy to block??
Isn't it possible to edit the "vci_updater.com" and change the name and serial manually?
Please elaborate on the answer, I have only 1 Full Chip C revision XS Evolution (Lexia) device, that I may use three times a year. So I cannot check variances..
Quote this message in a reply
04-01-2016, 10:41 AM,
Post: #32
RE: Reflash lexia interface from B to C
Open the "vci_updater.com" with a HEX Editor and read what Mr. NLC wrote in it.
I use my tool from time to time but what I wanna tell you is that when I bought my clone from china ( full chip with S/N 963830 C ) I tested as it is before reflash it with Mr. NLC vci_updater.com and in some cars that I know 100% that a "B" clone didn't worked before this "C" clone didn't worked too.
Then I tested it again in same cars after I flashed with Mr. NLC vci_updater.com.
And all worked 100%
I took my clone for a long now so I do not rememeber when I did this tests but if I rememebr well was in May 2013
This are my tests that I did. What will be we will see. Conclusions are yours
Good luck
Quote this message in a reply
04-01-2016, 12:35 PM,
Post: #33
RE: Reflash lexia interface from B to C
I did look into the file some time back, the file I have is for someone from (Staffordshire, UK), in fact I put a request to get a different file so that I identify the area of change. Do you have a different file?

Also:
(04-01-2016, 10:41 AM)mattydr67 Wrote:  I bought my clone from china ( full chip with S/N 963830 C ) I tested as it is before reflash it with Mr. NLC vci_updater.com and in some cars that I know 100% that a "B" clone didn't worked before this "C" clone didn't worked too.
Then I tested it again in same cars after I flashed with Mr. NLC vci_updater.com. And all worked 100%

You mean to say that flashing your "C" Revision Full Chip device with NLC firmware allowed it to work with cars it could not work with, before the flash!

Which DiagBox version were you testing with? I am asking because someone was saying that Revisions "C" clones have been blocked in DiagBox v7.66+. If that is true, then the solution is by editing "vci_updater.com" and changing the serial number in the file and re-flashing it..
Quote this message in a reply
04-01-2016, 15:44 PM,
Post: #34
RE: Reflash lexia interface from B to C
As I said I don't remember. I did it in May 2013, sorry
As I remember the last version that I tested with my flashed tool was 7.65 or 7.66 but I cannot tell you exaclly. As I said I use it very rare.
But as soon I will have oportunity to do a test I will tell you.

Ok if you wanna play you can edith the serial in the vci_updater.com. But take care.
Good luck
Quote this message in a reply
04-01-2016, 16:13 PM,
Post: #35
RE: Reflash lexia interface from B to C
I have posted DiagBox v7.72 which I successfully tested, which means my device is not blocked. This is why sometimes what people are reporting probably apply to their setup only.

I have also compiled DiagBox v7.79 (using 8.10-8.15 updates) last week, which seems functioning fine; but I really hardly use the devise.

However, your experiment is important to may people who may not be able to access their cars with their current Revision "C" devices. I think you should start a new thread about it.
Quote this message in a reply
05-01-2016, 08:52 AM,
Post: #36
RE: Reflash lexia interface from B to C
(03-01-2016, 11:33 AM)Simple Wrote:  
(28-07-2015, 10:27 AM)mattydr67 Wrote:  The serial it is allready blacklisted in the DB v7.66 and on in fw 4.3.3
All things that fly for free then it can be killed
Good luck

Hi mattyde67,
Is this nlc serial different from the ones on the clones? Wouldn't all the clones have the same serial; and it is easy to block??
Isn't it possible to edit the "vci_updater.com" and change the name and serial manually?
Please elaborate on the answer, I have only 1 Full Chip C revision XS Evolution (Lexia) device, that I may use three times a year. So I cannot check variances..

If you edit the "vci_updater.com" and change the name and serial manually you will brick your interface. NLC was made flash for everyone personally , there is a checksum for all info inside , the reason are sellers.
Quote this message in a reply
05-01-2016, 10:19 AM,
Post: #37
RE: Reflash lexia interface from B to C
(05-01-2016, 08:52 AM)milanoffracing Wrote:  If you edit the "vci_updater.com" and change the name and serial manually you will brick your interface.

Not if you are an Engineer who knows what he is doing!! and if you don't, just re-flash it back with the firmware that works..
Quote this message in a reply
11-01-2016, 14:42 PM,
Post: #38
RE: Reflash lexia interface from B to C
Please, is there working solution to update firmware? Or need replace pic maybe? Make offer....*'

                                                               
Was I helpful? Please support my time and Hit [Image: tyl_add.png]  And [Image: postbit_reputation.gif] -button's.

Reworked Galletto 0475/Kess 2.47/5.017/Ktag 2.25/7.020 and New KESS 5.028/2.47 VR(virtual reading) and New KTAG 8.000/2.47!! enjoy
Quote this message in a reply
[+] 1 user says Thank You to Bimmeristi for this post
11-01-2016, 16:23 PM,
Post: #39
RE: Reflash lexia interface from B to C
(11-01-2016, 14:42 PM)Bimmeristi Wrote:  Please, is there working solution to update firmware? Or need replace pic maybe? Make offer....*'
Nlc can do it
Quote this message in a reply
[+] 1 user says Thank You to teerak2uk for this post
20-08-2016, 20:34 PM,
Post: #40
RE: Reflash lexia interface from B to C
(11-01-2016, 14:42 PM)Bimmeristi Wrote:  Please, is there working solution to update firmware? Or need replace pic maybe? Make offer....*'

I've got the same question,...

Can somebody help with this???

Greetz, H
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
PCitroen PSA interface FIRMWARE 4.3.7 from official diagbox 9.37 911sniper 4 3,138 01-09-2019, 17:47 PM
Last Post: mattydr67
  Lexia FullChip don't work, please help me solve the issue no_name 6 310 18-08-2019, 18:27 PM
Last Post: no_name
PCitroen PSA interface differences don1 19 11,085 05-08-2019, 19:20 PM
Last Post: rodney lucas
1Actia psa interface reflash or no ? pardul 7 336 05-08-2019, 09:04 AM
Last Post: zmann
PCitroen Lexia interface recognization problem Jedrek 2 990 30-06-2019, 20:35 PM
Last Post: Joda
  LEXIA 3 DIAGBOX SAYS CONNECT VCI Mohamed.Ar 3 4,325 24-06-2019, 20:36 PM
Last Post: pica14
  Lexia & PP2000 update 8.47-8.50 (DiagBox v8.50) Simple 21 11,125 14-05-2019, 12:49 PM
Last Post: mattdj
  old Lexia Wilus 4 691 14-04-2019, 16:11 PM
Last Post: Wilus
PPeugeot Lexia usb cant recognized error ! fadyeid 10 3,630 02-04-2019, 12:31 PM
Last Post: Jedrek
PPeugeot Precautions for original Peugeot Planet Interface allpro 6 924 01-03-2019, 14:00 PM
Last Post: leon163

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content