Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Damaged the EEPROM 95128 in FEM
31-03-2024, 13:49 PM,
Post: #1
|
|||
|
|||
Damaged the EEPROM 95128 in FEM
I have a FEM with a key on the table that I use to test the NBT unit
I damaged the EEPROM in FEM, two legs of the 95128 system. Now in FEM it disconnects the contactor cyclically.I need the contents of this memory to run FEM. Next, I will try to add the cleaned key using the BMWExplorer 2018.12 clone. Can anyone share the contents of memory 95128 for such a FEM module? |
|||
31-03-2024, 16:01 PM,
Post: #2
|
|||
|
|||
RE: Damaged the EEPROM 95128 in FEM
(31-03-2024, 13:49 PM)wxwwxw Wrote: I have a FEM with a key on the table that I use to test the NBT unit here you go |