[theno1pars]

hi all

I am looking to read and write my Peugeot 1.4hdi edc17c10 ecu
can someone recommend a cheapish tool to read and write this ecu.I am looking to immo off and probably dpf and egr off with a stage 1 tune.


I am a newbie to this but have experience repairing phones and laptops etc as well as being a retired mechanic.

[ROD-BENDERS]

Pcmflash dongle module 71 (china)

Scanmatik 2 clone with egpt boot cable

Job done

[theno1pars]

Pcmflash dongle module 71 (china)

Scanmatik 2 clone with egpt boot cable

Job done

thanks for the super quick reply
             do i need the pin code for the car to do it as i havent got it???
is there any tutorials available to follow as it will be my first ecu flash.I am presuming i will need other software aswell to modify the flash files.

[al70]

in the folder is a link to the equipment you need for reading your ecu and many more, the link below is to all the connections you'll need, if you don't know how to edit files yourself i advise you to just read the files with the tool in the folder and post the files here for immo/dpf/egr, whatever modifications you need, you wont learn how to modify files yourself overnight, no matter how many phones you've repaired, best of luck, any more questions, just ask.

https://cartechnology.co.uk/showthread.php?tid=76537

[theno1pars]

in the folder is a link to the equipment you need for reading your ecu and many more, the link is to all the connections you'll need, if you don't know how to edit files yourself i advise you to just read the files with the tool in the folder and post the files here for immo/dpf/egr, whatever modifications you need, you wont learn how to modify files yourself overnight, no matter how many phones you've repaired, best of luck, any more questions, just ask.

https://cartechnology.co.uk/showthread.php?tid=76537

thanks for the link to the hardware.I have just purchased it but do i still need a gpt boot cable also?
I have bookmarked a godiag gpt boot cable on ebay just incase.

[al70]

the gpt cable comes with the hardware in the link, no need to buy anything else, connection diagrams are in the green link in the post

[banza]

amt bst goldbox does de job well, i have one

[al70]

yeah banza, same s?@t different name but with scanmatic, you can use other software, forscan, techstream, etc.etc., good to have both though, especially if you don't have any experience prying open edc16's.