[bm92]

Hi everyone, i need to retrofit KOMBI2 lci on F20 2014.
I have problem because e-sys can not find CAFD for SWE.
I modified build date to 03/18.

I think FEM has been changed because modules are missing in ISTA like TRSVC and PMA and other, car does not have this options...
I-level from factory (F020-17-07-505) is not matching the car (2014)
I don't know if it is a problem to retrofit this new kombi...

VIN from car: WBA1C31090J536495
Donor LCI kombi: 3G23310

Donor kombi has HUD blue connector, i don' know if it can fit..

Thank you

[evaldazj]

Add cafd with f56 chassis, then code with Your's FA

[dumitru.o]

you want to retrofit KOMBI in a car that has a cloned FEM?

first put the correct FEM and get everything working properly and then you move to retrofitting KOMBI

[bm92]

Thank you guys
Impossible to work with this cloned FEM ??

[dumitru.o]

not impossible but you have some several issues there with modules which are not seen/connected.

you need to sort out those first

kombi retrofit should not have anything to do with cloned FEM, if you clean VIN and milage should be easy to code

but if you have that FEM....maybe you have a wrong VO in VCM

[bm92]

Same problem if select F056 chassis

---

not impossible but you have some several issues there with modules which are not seen/connected.

you need to sort out those first

kombi retrofit should not have anything to do with cloned FEM, if you clean VIN and milage should be easy to code

but if you have that FEM....maybe you have a wrong VO in VCM

Ok i see, how can i modify VO in VCM please ?
VIN is cleared, mileage is lower than car mileage

[Node]

This looks like you have BROKEN F056 KIS database, as that SWFL is from 2018. You sure you have F056 PSdZdata??? Or maybe ESys version is too old.

[bm92]

e-sys 3.33.4
psdzdata 21-11-535
i can code or detect CAF for SWE for all other modules

[Node]

You could provide FA and SVT files so I (or someone else) can try on their computers.

[bm92]

here it is
original FA
SVT actual