Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
08-08-2015, 15:34 PM,
Post: #1
|
|||
|
|||
DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
I am using a K+DCAN cable with Winkfp to program the GWS, KOMBI & DSC Modules but it failed at the last stage of the progression during completion.
The Errors code is 211: This Vin number is from a module taken from another BMW E60 C135xxx The Vin number (No). that i want to program in this same module, should be C445xxx This is a used GWS module that i bought(Gear selector Module) Here is the UIF block read out by Winkfp after programming error Entries of the user info field: -------------------------------------- Entry 1: Vehicle identification number: ÿÿÿÿÿÿÿ Date: 24.08.2006 Change index: DA Software number: Office number: Assembly identification number: 9138770 Seral number: Program number: Kilometer: 0 Dealer number: -------------------------------------- Entry 2: Vehicle identification number: CZ60034 Date: 21.08.2010 Change index: DA Software number: Office number: Assembly identification number: 9212217 Seral number: Program number: Kilometer: 0 Dealer number: -------------------------------------- ......................................................... Below i am using Winkfp to program ZB No. & Vin No. to reflect my E60 VIN ending with C445xx Does any experts have any experience to solve this one? .......................................................................... Now the KOMBI Module This is the KOMBI module UIF block before & after programming (Instrument cluster)the Vin number that i want written is C445xxx to match the E60 i am working on: Entries of the user info field: -------------------------------------- Entry 1: Vehicle identification number: C135533 Date: 01.12.2008 Change index: DA Software number: Office number: Assembly identification number: 9194887 Seral number: Program number: Kilometer: 0 Dealer number: -------------------------------------- Entry 2: Vehicle identification number: C135533 Date: 07.08.2015 Change index: DA Software number: Office number: Assembly identification number: 9194887 Seral number: Program number: Kilometer: 0 Dealer number: -------------------------------------- The KOMBI6 MODULE shows that winkfp 5.3.1 programming is OK, but did not reflect that Old VIN was changed to New VIN of C445948. ............................................................................................. Here below it shows that the KOMBI WAS Programmed OK Can anyone tell why the VIN is not changed? |
|||
08-08-2015, 16:26 PM,
Post: #2
|
|||
|
|||
RE: DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
Because you cannot change VIN in kombi with winkfp.
|
|||
25-09-2015, 00:14 AM,
Post: #3
|
|||
|
|||
RE: DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
HELLO SWEETBMW
What tool can i use to change it.? |
|||
25-09-2015, 05:15 AM,
Post: #4
|
|||
|
|||
RE: DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
You can try tool32.
|
|||
25-09-2015, 06:20 AM,
Post: #5
|
|||
|
|||
RE: DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
Tool32 cannot change vin in kombi via obd. its hardcoded. need eprom reader or very good skills.
|
|||
27-09-2015, 21:21 PM,
Post: #6
|
|||
|
|||
RE: DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
What tool do we use to change the vin number in the gear selector switch (GWS)?
|
|||
27-09-2015, 21:33 PM,
Post: #7
|
|||
|
|||
RE: DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
|
|||
28-09-2015, 10:14 AM,
Post: #8
|
|||
|
|||
RE: DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
(27-09-2015, 21:33 PM)masa52 Wrote:(27-09-2015, 21:21 PM)BMWF01 Wrote: What tool do we use to change the vin number in the gear selector switch (GWS)? Just FYI ESYS will not work on E60 chassis, try it with WinKfp add VIN from that vehicle and try to flash it once more. Regards. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
F25 5AS,8th and 5AC coding with 6wb kombi | simplextibi | 1 | 90 |
04-05-2024, 06:37 AM Last Post: Stratofortress |
|
G12 used Kombi 35128WT | palapas1974 | 14 | 595 |
29-04-2024, 17:54 PM Last Post: johann74270 |
|
E60 M5 KOMBI cruise control | bmwfnatic | 4 | 200 |
29-04-2024, 09:51 AM Last Post: bmwfnatic |
|
Winkfp cannot read uif | MPTeam | 7 | 232 |
27-04-2024, 19:07 PM Last Post: MPTeam |
|
Esys error message only on EPS. ''Failed to get CAFs for SWE'' | arthur101 | 2 | 162 |
25-04-2024, 22:48 PM Last Post: arthur101 |
|
CCC flash WINKFP ICOM | BimmerSLO | 9 | 412 |
29-03-2024, 19:17 PM Last Post: Hoborg |
|
WinKFP can't find ZUSB 6957356 | andre426hemi | 4 | 319 |
25-03-2024, 00:40 AM Last Post: armenh7 |
|
Solved ✔ ISTA Standalone WLAN programming | botho | 4 | 406 |
21-03-2024, 11:13 AM Last Post: botho |
|
F15 Programming Error | mcrussell | 7 | 496 |
20-03-2024, 05:38 AM Last Post: SweetBMW |
|
BMW X6 E71 Programming | Ryzen | 5 | 309 |
16-03-2024, 12:42 PM Last Post: Node |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content