[neo123]

My mistake, u can read this by bdm points on the back of the clock, with standard programmer ( upa or xprogm.

I purchased this digiprog for the purpose of doin the mondeo.
People have said it can be done with digiprog 3 . Im just stuck why the wires are different.

[teerak2uk]

It will do HC12 I've done some Volvo xc90 2011 you cant do HCS12

[neo123]

It will do HC12 I've done some Volvo xc90 2011 you cant do HCS12

Thanks, but my concern is why the cable wiring in different order and colour.
which pin shud be yellow.
thanks in afvance

[teerak2uk]

Thanks, but my concern is why the cable wiring in different order and colour.
which pin shud be yellow.
thanks in afvance

different order and colour is just down to bad chinese workmanship

ST 51
brown13 brown
green 17 green
yellow18 yellow
white 25 white

[neo123]

ST 51
brown13 brown
green 17 green
yellow18 yellow
white 25 white

theyve called mine 51/2. Whereas ures is st51.
cable number 1 which is the clip for avensis, do u please have pin numbers for the wires.

[teerak2uk]

Ignore the 2 part

---

Put clip to it and read it if it don't read then turn clip and read again, when it reads correctly then you'll know which is pin 1 then mark it for future reference

[neo123]

It worked, but the speedo shows in km on the digiprog. so if I want 150,000 miles on speedo do I put in 241401km in the digiprog.

It that how we do it

[teerak2uk]

Easy enough to work out go to setup and select km or mls whichever it reads correctly as

---

Thanks!!!! Oh yeah don't mention it.

[emos]

Please help cable 42/2