[inotherwords]

I was trying to make you understand that there is not a daten issue here. The problem is wrong LM variant.

Lm1 has two completely different versions. Lm2 can be coded from ahl to non ahl.

Lm1 can't.

So he has to replace it with LM2 any version or with LM1 w/o AHL?

[SweetBMW]

Lm1. Non ahl. Or lm2 any version. Your best bet is to use the correct LM anyway though. And that would be LM 1 non ahl.


Sent from my iPhone using Tapatalk

[Mrg0721]

Not sure if its of any use but

ZB: 9116260

ECU Family: LM360

Well, that LM is suitable for cars with AHL. You can disable it via coding. It seems your NCS Expert doesn't have SP-Daten files or they are too old.

SP-Daten files are in place and I'm using 62.3
Not sure what could be the problem. The LM module has never been updated though if I'm not mistaken

Post a screenshot of NCS Expert with that error. And yes, LMA was not updated.

Unfortunately I don't have the car here with me so I cannot reproduce the error again.

Just a thought here. If you don't remove 524 from vo. Can you then code LM? If yes. Then datens are not the problem....

That's correct. When I removed 524 from CAS then LM was no longer accessible. When I put 524 back in CAS then all was okay with LM

[SweetBMW]

Then you have the answer. Swap LM. There is also wiring to be done


Sent from my iPhone using Tapatalk