Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Good China GNA600
04-07-2015, 19:28 PM,
Post: #11
|
|||
|
|||
RE: Good China GNA600
(04-07-2015, 00:38 AM)apoelistas Wrote: The reality is that I have just found a solution to make Xhorse work in x64 windows.. It took me 4 hours to manage. I just finished. that's because you need to change some values in reg edit and also click a .exe and run in compatibility mode. X-Horse is not such a big deal for Europe either, its quite easy to implement. |
|||
04-07-2015, 22:22 PM,
Post: #12
|
|||
|
|||
RE: Good China GNA600
I used a differeny dll for honda passthrough J2534_dist software, in the registry "FunctionLibrary, which I forgot to change again to the HDS respective dll in Genrad. I have to try again.
I did not run anything in compatibility mode because I am using the Wow6432Node. ---- Update Still no luck with DS253432-04.dll As I said the problem is the X-horse 1.4.8 driver which does not install the dll files, the sys files and does not register them. ---- Update After installing all dll files(from X-horse driver) to the windows system32 directory and the sys files (from the X-horse driver) to the windows system32 drivers directory the X-horse HDS is working It took me ages. but yes it works. It will take me another 5 hours to remember and write /document what I did. I guess the problem is the xhorse msi for honda which cannot install in x64 windows. Otherwise it would work. To make things easier I have a new registry file which makes the hds recognise a new mvci driver called X-horse rather than using GNA600. (Note If I choose compatibility mode XP HDS fails to load.) When I select a new vehicle with HDS then radio blue light appears on the X-horse and Honda Diagnostic System Initializing please wait....... The solution is the following: As I said this was not easy. It was not supposed to work with x64 bit environment beacause the x-horse msi does not install, + we need a new registry as a new driver called X-horse + we need to copy the X-horse driver dll, sys files to system32 folder, + we need to copy dll files + to copy the X-horse files found in runtime to C://Genrad Windows volume folder I will make a youtube video showing that it is working on x64 environments and can do diagnostics on my honda car. So it can do 1. passthru Control Module Reprogramming through the honda j2534 software with a hack it can work in x64 environments too 2. it can work with latest HDS software to do all honda diagnostics and with a hack it can work in x64 environments too 3 I have not tried the Control module updates from the HDS software (1 above does the same thing I guess) 4. I dont know if it can make any calibrations, but I dont think so. |
|||
Reputation: +1 - jaimie946 [+1] | |||
05-07-2015, 08:33 AM,
Post: #13
|
|||
|
|||
RE: Good China GNA600
WORKING
I have done all DTC check with HDS and my software/registry hacked X-horse driver IT DOES CALIBRATIONS TOO. I DID AIR BLEEDING OF THE AWD SYTEM. I Did not check the firmare Control Module update. If it manages to do that too then the Mongoose made by Drew will not sell anymore with the 6X price of the X-horse. |
|||
05-07-2015, 18:53 PM,
Post: #14
|
|||
|
|||
RE: Good China GNA600
(05-07-2015, 08:33 AM)apoelistas Wrote: WORKING immo working ? I knew it worked on 64bit systems, well done for sticking at it. |
|||
05-07-2015, 20:45 PM,
Post: #15
|
|||
|
|||
RE: Good China GNA600
Your suspicion/gut feeling was correct. I guess if you did not insist I would not have tried or continue trying. I think I am the first to succeed with Honda HDS X-horse and x64 environment combination. Thanks for insisting. My 2 days work did produce a solution. I have added value to my X-horse 3 in 1 since I can work with newer laptop. I would never imagine that it is possible to produce a hack for x64. I am very happy with this outcome. Regarding the immobi function I have never used this function before. Do I need a new key to test??? I do have a key generator but I dont have a key to test. If you can tell me how to test I can give it a try.
|
|||
06-07-2015, 01:59 AM,
Post: #16
|
|||
|
|||
RE: Good China GNA600
If you have a car with immo just see if you can access the immo and see how many keys are programmed. If immo doesn't work you won't be able to access it for information.
|
|||
06-07-2015, 03:05 AM,
Post: #17
|
|||
|
|||
RE: Good China GNA600
I bought AllScanner VCX plus new version tool. It is work Europe and JDM very well.Can do calibration also. Can work with HDS,TIS and SDD without any problem.
|
|||
06-07-2015, 08:45 AM,
Post: #18
|
|||
|
|||
RE: Good China GNA600
(05-07-2015, 20:45 PM)apoelistas Wrote: Your suspicion/gut feeling was correct. I guess if you did not insist I would not have tried or continue trying. I think I am the first to succeed with Honda HDS X-horse and x64 environment combination. Thanks for insisting. My 2 days work did produce a solution. I have added value to my X-horse 3 in 1 since I can work with newer laptop. I would never imagine that it is possible to produce a hack for x64. I am very happy with this outcome. Regarding the immobi function I have never used this function before. Do I need a new key to test??? I do have a key generator but I dont have a key to test. If you can tell me how to test I can give it a try. no you don't need another key to test keygen or immo function, from what ive seen X-House fails and the programming part but I have also seen 1 or 2 program a key. see if keygen works |
|||
06-07-2015, 11:01 AM,
Post: #19
|
|||
|
|||
RE: Good China GNA600
Ok thanks guys for the info. When I am back from Holidays I will give it a try and post my findings. I did not bring my laptop with me just my tablet. Cheers.
|
|||
10-07-2015, 11:26 AM,
Post: #20
|
|||
|
|||
RE: Good China GNA600
It does work, I haven't spoke with apoelistas yet but I'm trying to.I'm using DT Mongoose clone(fake Mini-vci)(fake of a clone haha) but read through this topic and some others, there plenty of info to get it working, I'm using 32-bit Windows 10 Tech Preview. NO IMMOBI for me I'm guessing hardware doesn't support it, because when IMMOBI selected the standard warnings come up, then it kicks out and loses comm with the clone. my clone software(1.4.1) this DOES work, maybe original Xhorse can do immobilizer, i'm going to start putting something together but need to talk to apoelistas before releasing. read and erased srs and pgmfi dtcs, data lists working, I can do plenty of testing with this trust me.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
HDS 3.017.012 GNA600 + HIM + SPX + XHORSE + J2534 | Inspector_Gadget | 45 | 26,561 |
29-04-2017, 14:47 PM Last Post: apoelistas |
|
Unable to connect GNA600 | daamianr | 1 | 1,497 |
15-02-2016, 12:35 PM Last Post: meiguang |
|
Honda HDS TO Work with HIM and GNA600 Reg file | TizWoz | 12 | 12,568 |
12-05-2014, 17:13 PM Last Post: thusithasam |
|
Honda HDS TO Work with HIM and GNA600 Reg file | TizWoz | 11 | 9,750 |
17-04-2014, 02:28 AM Last Post: kingauto |
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content